source: bootcd/isolinux/syslinux-6.03/gpxe/src/drivers/net/3c515.c @ 26ffad7

/*
*    3c515.c -- 3COM 3C515 Fast Etherlink ISA 10/100BASE-TX driver for etherboot
*    Copyright (C) 2002 Timothy Legge <tlegge@rogers.com>
*
*    This program is free software; you can redistribute it and/or modify
*    it under the terms of the GNU General Public License as published by
*    the Free Software Foundation; either version 2 of the License, or
*    (at your option) any later version.
*
*    This program is distributed in the hope that it will be useful,
*    but WITHOUT ANY WARRANTY; without even the implied warranty of
*    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
*    GNU General Public License for more details.
*
*    You should have received a copy of the GNU General Public License
*    along with this program; if not, write to the Free Software
*    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Portions of this code:
* Copyright (C) 1997-2002 Donald Becker  3c515.c: A 3Com ISA EtherLink XL "Corkscrew" ethernet driver for linux.
* Copyright (C) 2001 P.J.H.Fox (fox@roestock.demon.co.uk) ISAPNP Tools
* Copyright (c) 2002 Jaroslav Kysela <perex@suse.cz>  ISA Plug & Play support Linux Kernel
* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp> etherboot-5.0.5 3c595.c
* Coptright (C) 1995 Martin Renters etherboot-5.0.5 3c509.c
* Copyright (C) 1999 LightSys Technology Services, Inc. etherboot-5.0.5 3c90x.c
* Portions Copyright (C) 1999 Steve Smith etherboot-5.0.5 3c90x.c
*
* The probe and reset functions and defines are direct copies from the
* Becker code modified where necessary to make it work for etherboot
*
* The poll and transmit functions either contain code from or were written by referencing
* the above referenced etherboot drivers.  This driver would not have been
* possible without this prior work
*
* REVISION HISTORY:
* ================
* v0.10 4-17-2002       TJL     Initial implementation.
* v0.11 4-17-2002       TJL     Cleanup of the code
* v0.12 4-26-2002       TJL     Added ISA Plug and Play for Non-PNP Bioses
* v0.13 6-10-2002       TJL     Fixed ISA_PNP MAC Address problem
* v0.14 9-23-2003       TJL     Replaced delay with currticks
*
* Indent Options: indent -kr -i8
* *********************************************************/

FILE_LICENCE ( GPL2_OR_LATER );

/* to get some global routines like printf */
#include "etherboot.h"
/* to get the interface to the body of the program */
#include "nic.h"
#include <gpxe/isapnp.h>
#include <gpxe/isa.h> /* for ISA_ROM */
#include <gpxe/ethernet.h>

static void t3c515_wait(unsigned int nticks)
{
        unsigned int to = currticks() + nticks;
        while (currticks() < to)
                /* wait */ ;
}

/* TJL definations */
#define HZ      100
static int if_port;
static struct corkscrew_private *vp;
/* Brought directly from 3c515.c by Becker */
#define CORKSCREW 1

/* Maximum events (Rx packets, etc.) to handle at each interrupt.
static int max_interrupt_work = 20;
*/

/* Enable the automatic media selection code -- usually set. */
#define AUTOMEDIA 1

/* Allow the use of fragment bus master transfers instead of only
   programmed-I/O for Vortex cards.  Full-bus-master transfers are always
   enabled by default on Boomerang cards.  If VORTEX_BUS_MASTER is defined,
   the feature may be turned on using 'options'. */
#define VORTEX_BUS_MASTER

/* A few values that may be tweaked. */
/* Keep the ring sizes a power of two for efficiency. */
#define TX_RING_SIZE    16
#define RX_RING_SIZE    16
#define PKT_BUF_SZ              1536    /* Size of each temporary Rx buffer. */

/* "Knobs" for adjusting internal parameters. */
/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
#define DRIVER_DEBUG 1
/* Some values here only for performance evaluation and path-coverage
   debugging.
static int rx_nocopy, rx_copy, queued_packet;
*/

#define CORKSCREW_ID 10

#define EL3WINDOW(win_num) \
        outw(SelectWindow + (win_num), nic->ioaddr + EL3_CMD)
#define EL3_CMD 0x0e
#define EL3_STATUS 0x0e
#define RX_BYTES_MASK                   (unsigned short) (0x07ff)

enum corkscrew_cmd {
        TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
        RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
        UpStall = 6 << 11, UpUnstall = (6 << 11) + 1,
        DownStall = (6 << 11) + 2, DownUnstall = (6 << 11) + 3,
        RxDiscard = 8 << 11, TxEnable = 9 << 11, TxDisable =
            10 << 11, TxReset = 11 << 11,
        FakeIntr = 12 << 11, AckIntr = 13 << 11, SetIntrEnb = 14 << 11,
        SetStatusEnb = 15 << 11, SetRxFilter = 16 << 11, SetRxThreshold =
            17 << 11,
        SetTxThreshold = 18 << 11, SetTxStart = 19 << 11,
        StartDMAUp = 20 << 11, StartDMADown = (20 << 11) + 1, StatsEnable =
            21 << 11,
        StatsDisable = 22 << 11, StopCoax = 23 << 11,
};

/* The SetRxFilter command accepts the following classes: */
enum RxFilter {
        RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
};

/* Bits in the general status register. */
enum corkscrew_status {
        IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
        TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
        IntReq = 0x0040, StatsFull = 0x0080,
        DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
        DMAInProgress = 1 << 11,        /* DMA controller is still busy. */
        CmdInProgress = 1 << 12,        /* EL3_CMD is still busy. */
};

/* Register window 1 offsets, the window used in normal operation.
   On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
enum Window1 {
        TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
        RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
        TxFree = 0x1C,          /* Remaining free bytes in Tx buffer. */
};
enum Window0 {
        Wn0IRQ = 0x08,
#if defined(CORKSCREW)
        Wn0EepromCmd = 0x200A,  /* Corkscrew EEPROM command register. */
        Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */
#else
        Wn0EepromCmd = 10,      /* Window 0: EEPROM command register. */
        Wn0EepromData = 12,     /* Window 0: EEPROM results register. */
#endif
};
enum Win0_EEPROM_bits {
        EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
        EEPROM_EWENB = 0x30,    /* Enable erasing/writing for 10 msec. */
        EEPROM_EWDIS = 0x00,    /* Disable EWENB before 10 msec timeout. */
};

enum Window3 {                  /* Window 3: MAC/config bits. */
        Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
};
union wn3_config {
        int i;
        struct w3_config_fields {
                unsigned int ram_size:3, ram_width:1, ram_speed:2,
                    rom_size:2;
                int pad8:8;
                unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1,
                    autoselect:1;
                int pad24:7;
        } u;
};

enum Window4 {
        Wn4_NetDiag = 6, Wn4_Media = 10,        /* Window 4: Xcvr/media bits. */
};
enum Win4_Media_bits {
        Media_SQE = 0x0008,     /* Enable SQE error counting for AUI. */
        Media_10TP = 0x00C0,    /* Enable link beat and jabber for 10baseT. */
        Media_Lnk = 0x0080,     /* Enable just link beat for 100TX/100FX. */
        Media_LnkBeat = 0x0800,
};
enum Window7 {                  /* Window 7: Bus Master control. */
        Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
};

/* Boomerang-style bus master control registers.  Note ISA aliases! */
enum MasterCtrl {
        PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
            0x40c,
        TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
};

/* The Rx and Tx descriptor lists.
   Caution Alpha hackers: these types are 32 bits!  Note also the 8 byte
   alignment contraint on tx_ring[] and rx_ring[]. */
struct boom_rx_desc {
        u32 next;
        s32 status;
        u32 addr;
        s32 length;
};

/* Values for the Rx status entry. */
enum rx_desc_status {
        RxDComplete = 0x00008000, RxDError = 0x4000,
        /* See boomerang_rx() for actual error bits */
};

struct boom_tx_desc {
        u32 next;
        s32 status;
        u32 addr;
        s32 length;
};

struct corkscrew_private {
        const char *product_name;
        struct net_device *next_module;
        /* The Rx and Tx rings are here to keep them quad-word-aligned. */
        struct boom_rx_desc rx_ring[RX_RING_SIZE];
        struct boom_tx_desc tx_ring[TX_RING_SIZE];
        /* The addresses of transmit- and receive-in-place skbuffs. */
        struct sk_buff *rx_skbuff[RX_RING_SIZE];
        struct sk_buff *tx_skbuff[TX_RING_SIZE];
        unsigned int cur_rx, cur_tx;    /* The next free ring entry */
        unsigned int dirty_rx, dirty_tx;        /* The ring entries to be free()ed. */
        struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl.  */
        int capabilities;       /* Adapter capabilities word. */
        int options;            /* User-settable misc. driver options. */
        int last_rx_packets;    /* For media autoselection. */
        unsigned int available_media:8, /* From Wn3_Options */
         media_override:3,      /* Passed-in media type. */
         default_media:3,       /* Read from the EEPROM. */
         full_duplex:1, autoselect:1, bus_master:1,     /* Vortex can only do a fragment bus-m. */
         full_bus_master_tx:1, full_bus_master_rx:1,    /* Boomerang  */
         tx_full:1;
};

/* The action to take with a media selection timer tick.
   Note that we deviate from the 3Com order by checking 10base2 before AUI.
 */
enum xcvr_types {
        XCVR_10baseT =
            0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
        XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
};

static struct media_table {
        char *name;
        unsigned int media_bits:16,     /* Bits to set in Wn4_Media register. */
         mask:8,                /* The transceiver-present bit in Wn3_Config. */
         next:8;                /* The media type to try next. */
        short wait;             /* Time before we check media status. */
} media_tbl[] = {
        {
        "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10}
        , {
        "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}
        , {
        "undefined", 0, 0x80, XCVR_10baseT, 10000}
        , {
        "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10}
        , {
        "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx,
                    (14 * HZ) / 10}
        , {
        "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}
        , {
        "MII", 0, 0x40, XCVR_10baseT, 3 * HZ}
        , {
        "undefined", 0, 0x01, XCVR_10baseT, 10000}
        , {
        "Default", 0, 0xFF, XCVR_10baseT, 10000}
,};

/* TILEG Modified to remove reference to dev */
static int corkscrew_found_device(int ioaddr, int irq, int product_index,
                                  int options, struct nic *nic);
static int corkscrew_probe1(int ioaddr, int irq, int product_index,
                            struct nic *nic);

/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
/* Note: this is the only limit on the number of cards supported!! */
static int options = -1;

/* End Brought directly from 3c515.c by Becker */

/**************************************************************************
RESET - Reset adapter
***************************************************************************/
static void t515_reset(struct nic *nic)
{
        union wn3_config config;
        int i;

        /* Before initializing select the active media port. */
        EL3WINDOW(3);
        if (vp->full_duplex)
                outb(0x20, nic->ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
        config.i = inl(nic->ioaddr + Wn3_Config);

        if (vp->media_override != 7) {
                DBG ( "Media override to transceiver %d (%s).\n",
                      vp->media_override,
                      media_tbl[vp->media_override].name);
                if_port = vp->media_override;
        } else if (vp->autoselect) {
                /* Find first available media type, starting with 100baseTx. */
                if_port = 4;
                while (!(vp->available_media & media_tbl[if_port].mask))
                        if_port = media_tbl[if_port].next;

                DBG ( "Initial media type %s.\n",
                      media_tbl[if_port].name);
        } else
                if_port = vp->default_media;

        config.u.xcvr = if_port;
        outl(config.i, nic->ioaddr + Wn3_Config);

        DBG ( "corkscrew_open() InternalConfig 0x%hX.\n",
              config.i);

        outw(TxReset, nic->ioaddr + EL3_CMD);
        for (i = 20; i >= 0; i--)
                if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
                        break;

        outw(RxReset, nic->ioaddr + EL3_CMD);
        /* Wait a few ticks for the RxReset command to complete. */
        for (i = 20; i >= 0; i--)
                if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress))
                        break;

        outw(SetStatusEnb | 0x00, nic->ioaddr + EL3_CMD);

#ifdef debug_3c515
                EL3WINDOW(4);
                DBG ( "FIXME: fix print for irq, not 9" );
                DBG ( "corkscrew_open() irq %d media status 0x%hX.\n",
                      9, inw(nic->ioaddr + Wn4_Media) );
#endif

        /* Set the station address and mask in window 2 each time opened. */
        EL3WINDOW(2);
        for (i = 0; i < 6; i++)
                outb(nic->node_addr[i], nic->ioaddr + i);
        for (; i < 12; i += 2)
                outw(0, nic->ioaddr + i);

        if (if_port == 3)
                /* Start the thinnet transceiver. We should really wait 50ms... */
                outw(StartCoax, nic->ioaddr + EL3_CMD);
        EL3WINDOW(4);
        outw((inw(nic->ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
             media_tbl[if_port].media_bits, nic->ioaddr + Wn4_Media);

        /* Switch to the stats window, and clear all stats by reading. */
/*      outw(StatsDisable, nic->ioaddr + EL3_CMD);*/
        EL3WINDOW(6);
        for (i = 0; i < 10; i++)
                inb(nic->ioaddr + i);
        inw(nic->ioaddr + 10);
        inw(nic->ioaddr + 12);
        /* New: On the Vortex we must also clear the BadSSD counter. */
        EL3WINDOW(4);
        inb(nic->ioaddr + 12);
        /* ..and on the Boomerang we enable the extra statistics bits. */
        outw(0x0040, nic->ioaddr + Wn4_NetDiag);

        /* Switch to register set 7 for normal use. */
        EL3WINDOW(7);

        /* Temporarily left in place.  If these FIXMEs are printed
           it meand that special logic for that card may need to be added
           see Becker's 3c515.c driver */
        if (vp->full_bus_master_rx) {   /* Boomerang bus master. */
                printf("FIXME: Is this if necessary");
                vp->cur_rx = vp->dirty_rx = 0;
                DBG ( "   Filling in the Rx ring.\n" );
                for (i = 0; i < RX_RING_SIZE; i++) {
                        printf("FIXME: Is this if necessary");
                }
        }
        if (vp->full_bus_master_tx) {   /* Boomerang bus master Tx. */
                vp->cur_tx = vp->dirty_tx = 0;
                outb(PKT_BUF_SZ >> 8, nic->ioaddr + TxFreeThreshold);   /* Room for a packet. */
                /* Clear the Tx ring. */
                for (i = 0; i < TX_RING_SIZE; i++)
                        vp->tx_skbuff[i] = 0;
                outl(0, nic->ioaddr + DownListPtr);
        }
        /* Set receiver mode: presumably accept b-case and phys addr only. */
        outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
             nic->ioaddr + EL3_CMD);

        outw(RxEnable, nic->ioaddr + EL3_CMD);  /* Enable the receiver. */
        outw(TxEnable, nic->ioaddr + EL3_CMD);  /* Enable transmitter. */
        /* Allow status bits to be seen. */
        outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
             (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
             (vp->full_bus_master_rx ? UpComplete : RxComplete) |
             (vp->bus_master ? DMADone : 0), nic->ioaddr + EL3_CMD);
        /* Ack all pending events, and set active indicator mask. */
        outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
             nic->ioaddr + EL3_CMD);
        outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
             | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
             nic->ioaddr + EL3_CMD);

}

/**************************************************************************
POLL - Wait for a frame
***************************************************************************/
static int t515_poll(struct nic *nic, int retrieve)
{
        short status, cst;
        register short rx_fifo;

        cst = inw(nic->ioaddr + EL3_STATUS);

        if ((cst & RxComplete) == 0) {
                /* Ack all pending events, and set active indicator mask. */
                outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
                     nic->ioaddr + EL3_CMD);
                outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete |
                     StatsFull | (vp->
                                  bus_master ? DMADone : 0) | UpComplete |
                     DownComplete, nic->ioaddr + EL3_CMD);
                return 0;
        }
        status = inw(nic->ioaddr + RxStatus);

        if (status & RxDError) {
                printf("RxDError\n");
                outw(RxDiscard, nic->ioaddr + EL3_CMD);
                return 0;
        }

        rx_fifo = status & RX_BYTES_MASK;
        if (rx_fifo == 0)
                return 0;

        if ( ! retrieve ) return 1;

        DBG ( "[l=%d", rx_fifo );
        insw(nic->ioaddr + RX_FIFO, nic->packet, rx_fifo / 2);
        if (rx_fifo & 1)
                nic->packet[rx_fifo - 1] = inb(nic->ioaddr + RX_FIFO);
        nic->packetlen = rx_fifo;

        while (1) {
                status = inw(nic->ioaddr + RxStatus);
                DBG ( "0x%hX*", status );
                rx_fifo = status & RX_BYTES_MASK;

                if (rx_fifo > 0) {
                        insw(nic->ioaddr + RX_FIFO, nic->packet + nic->packetlen,
                             rx_fifo / 2);
                        if (rx_fifo & 1)
                                nic->packet[nic->packetlen + rx_fifo - 1] =
                                    inb(nic->ioaddr + RX_FIFO);
                        nic->packetlen += rx_fifo;
                        DBG ( "+%d", rx_fifo );
                }
                if ((status & RxComplete) == 0) {
                        DBG ( "=%d", nic->packetlen );
                        break;
                }
                udelay(1000);
        }

        /* acknowledge reception of packet */
        outw(RxDiscard, nic->ioaddr + EL3_CMD);
        while (inw(nic->ioaddr + EL3_STATUS) & CmdInProgress);
#ifdef debug_3c515
        {
                unsigned short type = 0;
                type = (nic->packet[12] << 8) | nic->packet[13];
                if (nic->packet[0] + nic->packet[1] + nic->packet[2] +
                    nic->packet[3] + nic->packet[4] + nic->packet[5] ==
                    0xFF * ETH_ALEN)
                        DBG ( ",t=0x%hX,b]", type );
                else
                        DBG ( ",t=0x%hX]", type );
        }
#endif

        return 1;
}

/*************************************************************************
        3Com 515 - specific routines
**************************************************************************/
static char padmap[] = {
        0, 3, 2, 1
};
/**************************************************************************
TRANSMIT - Transmit a frame
***************************************************************************/
static void t515_transmit(struct nic *nic, const char *d,       /* Destination */
                          unsigned int t,       /* Type */
                          unsigned int s,       /* size */
                          const char *p)
{                               /* Packet */
        register int len;
        int pad;
        int status;

        DBG ( "{l=%d,t=0x%hX}", s + ETH_HLEN, t );

        /* swap bytes of type */
        t = htons(t);

        len = s + ETH_HLEN;     /* actual length of packet */
        pad = padmap[len & 3];

        /*
         * The 3c515 automatically pads short packets to minimum ethernet length,
         * but we drop packets that are too large. Perhaps we should truncate
         * them instead?
         Copied from 3c595.  Is this true for the 3c515?
         */
        if (len + pad > ETH_FRAME_LEN) {
                return;
        }
        /* drop acknowledgements */
        while ((status = inb(nic->ioaddr + TxStatus)) & TxComplete) {
                /*if(status & (TXS_UNDERRUN|0x88|TXS_STATUS_OVERFLOW)) { */
                outw(TxReset, nic->ioaddr + EL3_CMD);
                outw(TxEnable, nic->ioaddr + EL3_CMD);
/*              }                                                          */

                outb(0x0, nic->ioaddr + TxStatus);
        }

        while (inw(nic->ioaddr + TxFree) < len + pad + 4) {
                /* no room in FIFO */
        }

        outw(len, nic->ioaddr + TX_FIFO);
        outw(0x0, nic->ioaddr + TX_FIFO);       /* Second dword meaningless */

        /* write packet */
        outsw(nic->ioaddr + TX_FIFO, d, ETH_ALEN / 2);
        outsw(nic->ioaddr + TX_FIFO, nic->node_addr, ETH_ALEN / 2);
        outw(t, nic->ioaddr + TX_FIFO);
        outsw(nic->ioaddr + TX_FIFO, p, s / 2);

        if (s & 1)
                outb(*(p + s - 1), nic->ioaddr + TX_FIFO);

        while (pad--)
                outb(0, nic->ioaddr + TX_FIFO); /* Padding */

        /* wait for Tx complete */
        while ((inw(nic->ioaddr + EL3_STATUS) & CmdInProgress) != 0);
}

/**************************************************************************
DISABLE - Turn off ethernet interface
***************************************************************************/
static void t515_disable ( struct nic *nic,
                           struct isapnp_device *isapnp ) {

        t515_reset(nic);

        /* This is a hack.  Since ltsp worked on my
           system without any disable functionality I
           have no way to determine if this works */

        /* Disable the receiver and transmitter. */
        outw(RxDisable, nic->ioaddr + EL3_CMD);
        outw(TxDisable, nic->ioaddr + EL3_CMD);

        if (if_port == XCVR_10base2)
                /* Turn off thinnet power.  Green! */
                outw(StopCoax, nic->ioaddr + EL3_CMD);


        outw(SetIntrEnb | 0x0000, nic->ioaddr + EL3_CMD);

        deactivate_isapnp_device ( isapnp );
        return;
}

static void t515_irq(struct nic *nic __unused, irq_action_t action __unused)
{
  switch ( action ) {
  case DISABLE :
    break;
  case ENABLE :
    break;
  case FORCE :
    break;
  }
}

static struct nic_operations t515_operations = {
        .connect        = dummy_connect,
        .poll           = t515_poll,
        .transmit       = t515_transmit,
        .irq            = t515_irq,

};

/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
You should omit the last argument struct pci_device * for a non-PCI NIC
***************************************************************************/
static int t515_probe ( struct nic *nic, struct isapnp_device *isapnp ) {

        /* Direct copy from Beckers 3c515.c removing any ISAPNP sections */

        nic->ioaddr = isapnp->ioaddr;
        nic->irqno = isapnp->irqno;
        activate_isapnp_device ( isapnp );

        /* Check the resource configuration for a matching ioaddr. */
        if ((unsigned)(inw(nic->ioaddr + 0x2002) & 0x1f0)
            != (nic->ioaddr & 0x1f0)) {
                DBG ( "3c515 ioaddr mismatch\n" );
                return 0;
        }

        /* Verify by reading the device ID from the EEPROM. */
        {
                int timer;
                outw(EEPROM_Read + 7, nic->ioaddr + Wn0EepromCmd);
                /* Pause for at least 162 us. for the read to take place. */
                for (timer = 4; timer >= 0; timer--) {
                        t3c515_wait(1);
                        if ((inw(nic->ioaddr + Wn0EepromCmd) & 0x0200) == 0)
                                break;
                }
                if (inw(nic->ioaddr + Wn0EepromData) != 0x6d50) {
                        DBG ( "3c515 read incorrect vendor ID from EEPROM" );
                        return 0;
                }

        }
        DBG ( "3c515 Resource configuration register 0x%X, DCR 0x%hX.\n",
              inl(nic->ioaddr + 0x2002), inw(nic->ioaddr + 0x2000) );
        corkscrew_found_device(nic->ioaddr, nic->irqno, CORKSCREW_ID,
                               options, nic);
        
        t515_reset(nic);        
        nic->nic_op     = &t515_operations;
        return 1;
}

static int
corkscrew_found_device(int ioaddr, int irq,
                       int product_index, int options, struct nic *nic)
{
        /* Direct copy from Becker 3c515.c with unecessary parts removed */
        vp->product_name = "3c515";
        vp->options = options;
        if (options >= 0) {
                vp->media_override =
                    ((options & 7) == 2) ? 0 : options & 7;
                vp->full_duplex = (options & 8) ? 1 : 0;
                vp->bus_master = (options & 16) ? 1 : 0;
        } else {
                vp->media_override = 7;
                vp->full_duplex = 0;
                vp->bus_master = 0;
        }

        corkscrew_probe1(ioaddr, irq, product_index, nic);
        return 0;
}

static int
corkscrew_probe1(int ioaddr, int irq, int product_index __unused,
                 struct nic *nic)
{
        unsigned int eeprom[0x40], checksum = 0;        /* EEPROM contents */
        int i;

        printf("3Com %s at 0x%hX, ", vp->product_name, ioaddr);

        /* Read the station address from the EEPROM. */
        EL3WINDOW(0);
        for (i = 0; i < 0x18; i++) {
                short *phys_addr = (short *) nic->node_addr;
                int timer;
                outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
                /* Pause for at least 162 us. for the read to take place. */
                for (timer = 4; timer >= 0; timer--) {
                        t3c515_wait(1);
                        if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
                                break;
                }
                eeprom[i] = inw(ioaddr + Wn0EepromData);
                DBG ( "Value %d: %hX        ", i, eeprom[i] );
                checksum ^= eeprom[i];
                if (i < 3)
                        phys_addr[i] = htons(eeprom[i]);
        }
        checksum = (checksum ^ (checksum >> 8)) & 0xff;
        if (checksum != 0x00)
                printf(" ***INVALID CHECKSUM 0x%hX*** ", checksum);

        DBG ( "%s", eth_ntoa ( nic->node_addr ) );

        if (eeprom[16] == 0x11c7) {     /* Corkscrew */

        }
        printf(", IRQ %d\n", irq);
        /* Tell them about an invalid IRQ. */
        if ( (irq <= 0 || irq > 15) ) {
                DBG (" *** Warning: this IRQ is unlikely to work! ***\n" );
        }

        {
                char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
                union wn3_config config;
                EL3WINDOW(3);
                vp->available_media = inw(ioaddr + Wn3_Options);
                config.i = inl(ioaddr + Wn3_Config);
                DBG ( "  Internal config register is %4.4x, "
                      "transceivers 0x%hX.\n",
                      config.i, inw(ioaddr + Wn3_Options) );
                printf
                    ("  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
                     8 << config.u.ram_size,
                     config.u.ram_width ? "word" : "byte",
                     ram_split[config.u.ram_split],
                     config.u.autoselect ? "autoselect/" : "",
                     media_tbl[config.u.xcvr].name);
                if_port = config.u.xcvr;
                vp->default_media = config.u.xcvr;
                vp->autoselect = config.u.autoselect;
        }
        if (vp->media_override != 7) {
                printf("  Media override to transceiver type %d (%s).\n",
                       vp->media_override,
                       media_tbl[vp->media_override].name);
                if_port = vp->media_override;
        }

        vp->capabilities = eeprom[16];
        vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
        /* Rx is broken at 10mbps, so we always disable it. */
        /* vp->full_bus_master_rx = 0; */
        vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;

        return 0;
}

static struct isapnp_device_id t515_adapters[] = {
        { "3c515 (ISAPnP)", ISAPNP_VENDOR('T','C','M'), 0x5051 },
};

ISAPNP_DRIVER ( t515_driver, t515_adapters );

DRIVER ( "3c515", nic_driver, isapnp_driver, t515_driver,
         t515_probe, t515_disable );

ISA_ROM ( "3c515", "3c515 Fast EtherLink ISAPnP" );