source: bootcd/isolinux/syslinux-6.03/gpxe/src/drivers/net/via-rhine.c

/* rhine.c:Fast Ethernet driver for Linux. */
/*
        Adapted 09-jan-2000 by Paolo Marini (paolom@prisma-eng.it)

        originally written by Donald Becker.

        This software may be used and distributed according to the terms
        of the GNU Public License (GPL), incorporated herein by reference.
        Drivers derived from this code also fall under the GPL and must retain
        this authorship and copyright notice.

        Under no circumstances are the authors responsible for
        the proper functioning of this software, nor do the authors assume any
        responsibility for damages incurred with its use.

        This driver is designed for the VIA VT86C100A Rhine-II PCI Fast Ethernet
        controller.

*/

static const char *version = "rhine.c v1.0.2 2004-10-29\n";

/* A few user-configurable values. */

// max time out delay time
#define W_MAX_TIMEOUT   0x0FFFU

/* Size of the in-memory receive ring. */
#define RX_BUF_LEN_IDX  3       /* 0==8K, 1==16K, 2==32K, 3==64K */
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)

/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
#define TX_BUF_SIZE     1536
#define RX_BUF_SIZE     1536

/* PCI Tuning Parameters
   Threshold is bytes transferred to chip before transmission starts. */
#define TX_FIFO_THRESH 256      /* In bytes, rounded down to 32 byte units. */

/* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024. */
#define RX_FIFO_THRESH  4       /* Rx buffer level before first PCI xfer.  */
#define RX_DMA_BURST    4       /* Maximum PCI burst, '4' is 256 bytes */
#define TX_DMA_BURST    4

/* Operational parameters that usually are not changed. */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT  ((2000*HZ)/1000)

#include "etherboot.h"
#include "nic.h"
#include <gpxe/pci.h>
#include <gpxe/ethernet.h>

/* define all ioaddr */

#define byPAR0                          ioaddr
#define byRCR                           ioaddr + 6
#define byTCR                           ioaddr + 7
#define byCR0                           ioaddr + 8
#define byCR1                           ioaddr + 9
#define byISR0                          ioaddr + 0x0c
#define byISR1                          ioaddr + 0x0d
#define byIMR0                          ioaddr + 0x0e
#define byIMR1                          ioaddr + 0x0f
#define byMAR0                          ioaddr + 0x10
#define byMAR1                          ioaddr + 0x11
#define byMAR2                          ioaddr + 0x12
#define byMAR3                          ioaddr + 0x13
#define byMAR4                          ioaddr + 0x14
#define byMAR5                          ioaddr + 0x15
#define byMAR6                          ioaddr + 0x16
#define byMAR7                          ioaddr + 0x17
#define dwCurrentRxDescAddr             ioaddr + 0x18
#define dwCurrentTxDescAddr             ioaddr + 0x1c
#define dwCurrentRDSE0                  ioaddr + 0x20
#define dwCurrentRDSE1                  ioaddr + 0x24
#define dwCurrentRDSE2                  ioaddr + 0x28
#define dwCurrentRDSE3                  ioaddr + 0x2c
#define dwNextRDSE0                     ioaddr + 0x30
#define dwNextRDSE1                     ioaddr + 0x34
#define dwNextRDSE2                     ioaddr + 0x38
#define dwNextRDSE3                     ioaddr + 0x3c
#define dwCurrentTDSE0                  ioaddr + 0x40
#define dwCurrentTDSE1                  ioaddr + 0x44
#define dwCurrentTDSE2                  ioaddr + 0x48
#define dwCurrentTDSE3                  ioaddr + 0x4c
#define dwNextTDSE0                     ioaddr + 0x50
#define dwNextTDSE1                     ioaddr + 0x54
#define dwNextTDSE2                     ioaddr + 0x58
#define dwNextTDSE3                     ioaddr + 0x5c
#define dwCurrRxDMAPtr                  ioaddr + 0x60
#define dwCurrTxDMAPtr                  ioaddr + 0x64
#define byMPHY                          ioaddr + 0x6c
#define byMIISR                         ioaddr + 0x6d
#define byBCR0                          ioaddr + 0x6e
#define byBCR1                          ioaddr + 0x6f
#define byMIICR                         ioaddr + 0x70
#define byMIIAD                         ioaddr + 0x71
#define wMIIDATA                        ioaddr + 0x72
#define byEECSR                         ioaddr + 0x74
#define byTEST                          ioaddr + 0x75
#define byGPIO                          ioaddr + 0x76
#define byCFGA                          ioaddr + 0x78
#define byCFGB                          ioaddr + 0x79
#define byCFGC                          ioaddr + 0x7a
#define byCFGD                          ioaddr + 0x7b
#define wTallyCntMPA                    ioaddr + 0x7c
#define wTallyCntCRC                    ioaddr + 0x7d
#define bySTICKHW                       ioaddr + 0x83
#define byWOLcrClr                      ioaddr + 0xA4
#define byWOLcgClr                      ioaddr + 0xA7
#define byPwrcsrClr                     ioaddr + 0xAC

/*---------------------  Exioaddr Definitions -------------------------*/

/*
 * Bits in the RCR register
 */

#define RCR_RRFT2               0x80
#define RCR_RRFT1               0x40
#define RCR_RRFT0               0x20
#define RCR_PROM                0x10
#define RCR_AB                  0x08
#define RCR_AM                  0x04
#define RCR_AR                  0x02
#define RCR_SEP                 0x01

/*
 * Bits in the TCR register
 */

#define TCR_RTSF                0x80
#define TCR_RTFT1               0x40
#define TCR_RTFT0               0x20
#define TCR_OFSET               0x08
#define TCR_LB1                 0x04    /* loopback[1] */
#define TCR_LB0                 0x02    /* loopback[0] */

/*
 * Bits in the CR0 register
 */

#define CR0_RDMD                0x40    /* rx descriptor polling demand */
#define CR0_TDMD                0x20    /* tx descriptor polling demand */
#define CR0_TXON                0x10
#define CR0_RXON                0x08
#define CR0_STOP                0x04    /* stop NIC, default = 1 */
#define CR0_STRT                0x02    /* start NIC */
#define CR0_INIT                0x01    /* start init process */


/*
 * Bits in the CR1 register
 */

#define CR1_SFRST               0x80    /* software reset */
#define CR1_RDMD1               0x40    /* RDMD1 */
#define CR1_TDMD1               0x20    /* TDMD1 */
#define CR1_KEYPAG              0x10    /* turn on par/key */
#define CR1_DPOLL               0x08    /* disable rx/tx auto polling */
#define CR1_FDX                 0x04    /* full duplex mode */
#define CR1_ETEN                0x02    /* early tx mode */
#define CR1_EREN                0x01    /* early rx mode */

/*
 * Bits in the CR register
 */

#define CR_RDMD                 0x0040  /* rx descriptor polling demand */
#define CR_TDMD                 0x0020  /* tx descriptor polling demand */
#define CR_TXON                 0x0010
#define CR_RXON                 0x0008
#define CR_STOP                 0x0004  /* stop NIC, default = 1 */
#define CR_STRT                 0x0002  /* start NIC */
#define CR_INIT                 0x0001  /* start init process */
#define CR_SFRST                0x8000  /* software reset */
#define CR_RDMD1                0x4000  /* RDMD1 */
#define CR_TDMD1                0x2000  /* TDMD1 */
#define CR_KEYPAG               0x1000  /* turn on par/key */
#define CR_DPOLL                0x0800  /* disable rx/tx auto polling */
#define CR_FDX                  0x0400  /* full duplex mode */
#define CR_ETEN                 0x0200  /* early tx mode */
#define CR_EREN                 0x0100  /* early rx mode */

/*
 * Bits in the IMR0 register
 */

#define IMR0_CNTM               0x80
#define IMR0_BEM                0x40
#define IMR0_RUM                0x20
#define IMR0_TUM                0x10
#define IMR0_TXEM               0x08
#define IMR0_RXEM               0x04
#define IMR0_PTXM               0x02
#define IMR0_PRXM               0x01

/* define imrshadow */

#define IMRShadow               0x5AFF

/*
 * Bits in the IMR1 register
 */

#define IMR1_INITM              0x80
#define IMR1_SRCM               0x40
#define IMR1_NBFM               0x10
#define IMR1_PRAIM              0x08
#define IMR1_RES0M              0x04
#define IMR1_ETM                0x02
#define IMR1_ERM                0x01

/*
 * Bits in the ISR register
 */

#define ISR_INITI               0x8000
#define ISR_SRCI                0x4000
#define ISR_ABTI                0x2000
#define ISR_NORBF               0x1000
#define ISR_PKTRA               0x0800
#define ISR_RES0                0x0400
#define ISR_ETI                 0x0200
#define ISR_ERI                 0x0100
#define ISR_CNT                 0x0080
#define ISR_BE                  0x0040
#define ISR_RU                  0x0020
#define ISR_TU                  0x0010
#define ISR_TXE                 0x0008
#define ISR_RXE                 0x0004
#define ISR_PTX                 0x0002
#define ISR_PRX                 0x0001

/*
 * Bits in the ISR0 register
 */

#define ISR0_CNT                0x80
#define ISR0_BE                 0x40
#define ISR0_RU                 0x20
#define ISR0_TU                 0x10
#define ISR0_TXE                0x08
#define ISR0_RXE                0x04
#define ISR0_PTX                0x02
#define ISR0_PRX                0x01

/*
 * Bits in the ISR1 register
 */

#define ISR1_INITI              0x80
#define ISR1_SRCI               0x40
#define ISR1_NORBF              0x10
#define ISR1_PKTRA              0x08
#define ISR1_ETI                0x02
#define ISR1_ERI                0x01

/* ISR ABNORMAL CONDITION */

#define ISR_ABNORMAL ISR_BE+ISR_RU+ISR_TU+ISR_CNT+ISR_NORBF+ISR_PKTRA

/*
 * Bits in the MIISR register
 */

#define MIISR_MIIERR            0x08
#define MIISR_MRERR             0x04
#define MIISR_LNKFL             0x02
#define MIISR_SPEED             0x01

/*
 * Bits in the MIICR register
 */

#define MIICR_MAUTO             0x80
#define MIICR_RCMD              0x40
#define MIICR_WCMD              0x20
#define MIICR_MDPM              0x10
#define MIICR_MOUT              0x08
#define MIICR_MDO               0x04
#define MIICR_MDI               0x02
#define MIICR_MDC               0x01

/*
 * Bits in the EECSR register
 */

#define EECSR_EEPR              0x80    /* eeprom programed status, 73h means programed */
#define EECSR_EMBP              0x40    /* eeprom embeded programming */
#define EECSR_AUTOLD            0x20    /* eeprom content reload */
#define EECSR_DPM               0x10    /* eeprom direct programming */
#define EECSR_CS                0x08    /* eeprom CS pin */
#define EECSR_SK                0x04    /* eeprom SK pin */
#define EECSR_DI                0x02    /* eeprom DI pin */
#define EECSR_DO                0x01    /* eeprom DO pin */

/*
 * Bits in the BCR0 register
 */

#define BCR0_CRFT2              0x20
#define BCR0_CRFT1              0x10
#define BCR0_CRFT0              0x08
#define BCR0_DMAL2              0x04
#define BCR0_DMAL1              0x02
#define BCR0_DMAL0              0x01

/*
 * Bits in the BCR1 register
 */

#define BCR1_CTSF               0x20
#define BCR1_CTFT1              0x10
#define BCR1_CTFT0              0x08
#define BCR1_POT2               0x04
#define BCR1_POT1               0x02
#define BCR1_POT0               0x01

/*
 * Bits in the CFGA register
 */

#define CFGA_EELOAD             0x80    /* enable eeprom embeded and direct programming */
#define CFGA_JUMPER             0x40
#define CFGA_MTGPIO             0x08
#define CFGA_T10EN              0x02
#define CFGA_AUTO               0x01

/*
 * Bits in the CFGB register
 */

#define CFGB_PD                 0x80
#define CFGB_POLEN              0x02
#define CFGB_LNKEN              0x01

/*
 * Bits in the CFGC register
 */

#define CFGC_M10TIO             0x80
#define CFGC_M10POL             0x40
#define CFGC_PHY1               0x20
#define CFGC_PHY0               0x10
#define CFGC_BTSEL              0x08
#define CFGC_BPS2               0x04    /* bootrom select[2] */
#define CFGC_BPS1               0x02    /* bootrom select[1] */
#define CFGC_BPS0               0x01    /* bootrom select[0] */

/*
 * Bits in the CFGD register
 */

#define CFGD_GPIOEN             0x80
#define CFGD_DIAG               0x40
#define CFGD_MAGIC              0x10
#define CFGD_RANDOM             0x08
#define CFGD_CFDX               0x04
#define CFGD_CEREN              0x02
#define CFGD_CETEN              0x01

/* Bits in RSR */
#define RSR_RERR                0x00000001
#define RSR_CRC                 0x00000002
#define RSR_FAE                 0x00000004
#define RSR_FOV                 0x00000008
#define RSR_LONG                0x00000010
#define RSR_RUNT                0x00000020
#define RSR_SERR                0x00000040
#define RSR_BUFF                0x00000080
#define RSR_EDP                 0x00000100
#define RSR_STP                 0x00000200
#define RSR_CHN                 0x00000400
#define RSR_PHY                 0x00000800
#define RSR_BAR                 0x00001000
#define RSR_MAR                 0x00002000
#define RSR_RXOK                0x00008000
#define RSR_ABNORMAL            RSR_RERR+RSR_LONG+RSR_RUNT

/* Bits in TSR */
#define TSR_NCR0                0x00000001
#define TSR_NCR1                0x00000002
#define TSR_NCR2                0x00000004
#define TSR_NCR3                0x00000008
#define TSR_COLS                0x00000010
#define TSR_CDH                 0x00000080
#define TSR_ABT                 0x00000100
#define TSR_OWC                 0x00000200
#define TSR_CRS                 0x00000400
#define TSR_UDF                 0x00000800
#define TSR_TBUFF               0x00001000
#define TSR_SERR                0x00002000
#define TSR_JAB                 0x00004000
#define TSR_TERR                0x00008000
#define TSR_ABNORMAL            TSR_TERR+TSR_OWC+TSR_ABT+TSR_JAB+TSR_CRS
#define TSR_OWN_BIT             0x80000000

#define CB_DELAY_LOOP_WAIT      10      /* 10ms */
/* enabled mask value of irq */

#define W_IMR_MASK_VALUE        0x1BFF  /* initial value of IMR */

/* Ethernet address filter type */
#define PKT_TYPE_DIRECTED       0x0001  /* obsolete, directed address is always accepted */
#define PKT_TYPE_MULTICAST      0x0002
#define PKT_TYPE_ALL_MULTICAST  0x0004
#define PKT_TYPE_BROADCAST      0x0008
#define PKT_TYPE_PROMISCUOUS    0x0020
#define PKT_TYPE_LONG           0x2000
#define PKT_TYPE_RUNT           0x4000
#define PKT_TYPE_ERROR          0x8000  /* accept error packets, e.g. CRC error */

/* Loopback mode */

#define NIC_LB_NONE             0x00
#define NIC_LB_INTERNAL         0x01
#define NIC_LB_PHY              0x02    /* MII or Internal-10BaseT loopback */

#define TX_RING_SIZE            2
#define RX_RING_SIZE            2
#define PKT_BUF_SZ              1536    /* Size of each temporary Rx buffer. */

#define PCI_REG_MODE3           0x53
#define MODE3_MIION             0x04    /* in PCI_REG_MOD3 OF PCI space */

enum rhine_revs {
    VT86C100A       = 0x00,
    VTunknown0      = 0x20,
    VT6102          = 0x40,
    VT8231          = 0x50, /* Integrated MAC */
    VT8233          = 0x60, /* Integrated MAC */
    VT8235          = 0x74, /* Integrated MAC */
    VT8237          = 0x78, /* Integrated MAC */
    VTunknown1      = 0x7C,
    VT6105          = 0x80,
    VT6105_B0       = 0x83,
    VT6105L         = 0x8A,
    VT6107          = 0x8C,
    VTunknown2      = 0x8E,
    VT6105M         = 0x90,
};

/* Transmit and receive descriptors definition */

struct rhine_tx_desc
{
    union VTC_tx_status_tag
    {
        struct
        {
            unsigned long ncro:1;
            unsigned long ncr1:1;
            unsigned long ncr2:1;
            unsigned long ncr3:1;
            unsigned long cols:1;
            unsigned long reserve_1:2;
            unsigned long cdh:1;
            unsigned long abt:1;
            unsigned long owc:1;
            unsigned long crs:1;
            unsigned long udf:1;
            unsigned long tbuff:1;
            unsigned long serr:1;
            unsigned long jab:1;
            unsigned long terr:1;
            unsigned long reserve_2:15;
            unsigned long own_bit:1;
        }
        bits;
        unsigned long lw;
    }
    tx_status;

    union VTC_tx_ctrl_tag
    {
        struct
        {
            unsigned long tx_buf_size:11;
            unsigned long extend_tx_buf_size:4;
            unsigned long chn:1;
            unsigned long crc:1;
            unsigned long reserve_1:4;
            unsigned long stp:1;
            unsigned long edp:1;
            unsigned long ic:1;
            unsigned long reserve_2:8;
        }
        bits;
        unsigned long lw;
    }
    tx_ctrl;

    unsigned long buf_addr_1:32;
    unsigned long buf_addr_2:32;

};

struct rhine_rx_desc
{
    union VTC_rx_status_tag
    {
        struct
        {
            unsigned long rerr:1;
            unsigned long crc_error:1;
            unsigned long fae:1;
            unsigned long fov:1;
            unsigned long toolong:1;
            unsigned long runt:1;
            unsigned long serr:1;
            unsigned long buff:1;
            unsigned long edp:1;
            unsigned long stp:1;
            unsigned long chn:1;
            unsigned long phy:1;
            unsigned long bar:1;
            unsigned long mar:1;
            unsigned long reserve_1:1;
            unsigned long rxok:1;
            unsigned long frame_length:11;
            unsigned long reverve_2:4;
            unsigned long own_bit:1;
        }
        bits;
        unsigned long lw;
    }
    rx_status;

    union VTC_rx_ctrl_tag
    {
        struct
        {
            unsigned long rx_buf_size:11;
            unsigned long extend_rx_buf_size:4;
            unsigned long reserved_1:17;
        }
        bits;
        unsigned long lw;
    }
    rx_ctrl;

    unsigned long buf_addr_1:32;
    unsigned long buf_addr_2:32;

};

struct {
        char txbuf[TX_RING_SIZE * PKT_BUF_SZ + 32];
        char rxbuf[RX_RING_SIZE * PKT_BUF_SZ + 32];
        char txdesc[TX_RING_SIZE * sizeof (struct rhine_tx_desc) + 32];
        char rxdesc[RX_RING_SIZE * sizeof (struct rhine_rx_desc) + 32];
} rhine_buffers __shared;

/* The I/O extent. */
#define rhine_TOTAL_SIZE 0x80

#ifdef  HAVE_DEVLIST
struct netdev_entry rhine_drv =
    { "rhine", rhine_probe, rhine_TOTAL_SIZE, NULL };
#endif

static int rhine_debug = 1;

/*
                                Theory of Operation

I. Board Compatibility

This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
controller.

II. Board-specific settings

Boards with this chip are functional only in a bus-master PCI slot.

Many operational settings are loaded from the EEPROM to the Config word at
offset 0x78.  This driver assumes that they are correct.
If this driver is compiled to use PCI memory space operations the EEPROM
must be configured to enable memory ops.

III. Driver operation

IIIa. Ring buffers

This driver uses two statically allocated fixed-size descriptor lists
formed into rings by a branch from the final descriptor to the beginning of
the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.

IIIb/c. Transmit/Receive Structure

This driver attempts to use a zero-copy receive and transmit scheme.

Alas, all data buffers are required to start on a 32 bit boundary, so
the driver must often copy transmit packets into bounce buffers.

The driver allocates full frame size skbuffs for the Rx ring buffers at
open() time and passes the skb->data field to the chip as receive data
buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
a fresh skbuff is allocated and the frame is copied to the new skbuff.
When the incoming frame is larger, the skbuff is passed directly up the
protocol stack.  Buffers consumed this way are replaced by newly allocated
skbuffs in the last phase of netdev_rx().

The RX_COPYBREAK value is chosen to trade-off the memory wasted by
using a full-sized skbuff for small frames vs. the copying costs of larger
frames.  New boards are typically used in generously configured machines
and the underfilled buffers have negligible impact compared to the benefit of
a single allocation size, so the default value of zero results in never
copying packets.  When copying is done, the cost is usually mitigated by using
a combined copy/checksum routine.  Copying also preloads the cache, which is
most useful with small frames.

Since the VIA chips are only able to transfer data to buffers on 32 bit
boundaries, the the IP header at offset 14 in an ethernet frame isn't
longword aligned for further processing.  Copying these unaligned buffers
has the beneficial effect of 16-byte aligning the IP header.

IIId. Synchronization

The driver runs as two independent, single-threaded flows of control.  One
is the send-packet routine, which enforces single-threaded use by the
dev->tbusy flag.  The other thread is the interrupt handler, which is single
threaded by the hardware and interrupt handling software.

The send packet thread has partial control over the Tx ring and 'dev->tbusy'
flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
queue slot is empty, it clears the tbusy flag when finished otherwise it sets
the 'lp->tx_full' flag.

The interrupt handler has exclusive control over the Rx ring and records stats
from the Tx ring.  After reaping the stats, it marks the Tx queue entry as
empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it
clears both the tx_full and tbusy flags.

IV. Notes

IVb. References

Preliminary VT86C100A manual from http://www.via.com.tw/
http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html

IVc. Errata

The VT86C100A manual is not reliable information.
The chip does not handle unaligned transmit or receive buffers, resulting
in significant performance degradation for bounce buffer copies on transmit
and unaligned IP headers on receive.
The chip does not pad to minimum transmit length.

*/

/* The rest of these values should never change. */
#define NUM_TX_DESC     2       /* Number of Tx descriptor registers. */

static struct rhine_private
{
    char devname[8];            /* Used only for kernel debugging. */
    const char *product_name;
    struct rhine_rx_desc *rx_ring;
    struct rhine_tx_desc *tx_ring;
    char *rx_buffs[RX_RING_SIZE];
    char *tx_buffs[TX_RING_SIZE];

    /* temporary Rx buffers. */

    int chip_id;
    int chip_revision;
    unsigned short ioaddr;
    unsigned int cur_rx, cur_tx;        /* The next free and used entries */
    unsigned int dirty_rx, dirty_tx;
    /* The saved address of a sent-in-place packet/buffer, for skfree(). */
    struct sk_buff *tx_skbuff[TX_RING_SIZE];
    unsigned char mc_filter[8]; /* Current multicast filter. */
    char phys[4];               /* MII device addresses. */
    unsigned int tx_full:1;     /* The Tx queue is full. */
    unsigned int full_duplex:1; /* Full-duplex operation requested. */
    unsigned int default_port:4;        /* Last dev->if_port value. */
    unsigned int media2:4;      /* Secondary monitored media port. */
    unsigned int medialock:1;   /* Don't sense media type. */
    unsigned int mediasense:1;  /* Media sensing in progress. */
}
rhine;

static void rhine_probe1 (struct nic *nic, struct pci_device *pci, int ioaddr,
                                 int chip_id, int options);
static int QueryAuto (int);
static int ReadMII (int byMIIIndex, int);
static void WriteMII (char, char, char, int);
static void MIIDelay (void);
static void rhine_init_ring (struct nic *dev);
static void rhine_disable (struct nic *nic);
static void rhine_reset (struct nic *nic);
static int rhine_poll (struct nic *nic, int retreive);
static void rhine_transmit (struct nic *nic, const char *d, unsigned int t,
                            unsigned int s, const char *p);
static void reload_eeprom(int ioaddr);


static void reload_eeprom(int ioaddr)
{
        int i;
        outb(0x20, byEECSR);
        /* Typically 2 cycles to reload. */
        for (i = 0; i < 150; i++)
                if (! (inb(byEECSR) & 0x20))
                        break;
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
static void
rhine_init_ring (struct nic *nic)
{
    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    int i;

    tp->tx_full = 0;
    tp->cur_rx = tp->cur_tx = 0;
    tp->dirty_rx = tp->dirty_tx = 0;

    for (i = 0; i < RX_RING_SIZE; i++)
    {

        tp->rx_ring[i].rx_status.bits.own_bit = 1;
        tp->rx_ring[i].rx_ctrl.bits.rx_buf_size = 1536;

        tp->rx_ring[i].buf_addr_1 = virt_to_bus (tp->rx_buffs[i]);
        tp->rx_ring[i].buf_addr_2 = virt_to_bus (&tp->rx_ring[i + 1]);
        /* printf("[%d]buf1=%hX,buf2=%hX",i,tp->rx_ring[i].buf_addr_1,tp->rx_ring[i].buf_addr_2); */
    }
    /* Mark the last entry as wrapping the ring. */
    /* tp->rx_ring[i-1].rx_ctrl.bits.rx_buf_size =1518; */
    tp->rx_ring[i - 1].buf_addr_2 = virt_to_bus (&tp->rx_ring[0]);
    /*printf("[%d]buf1=%hX,buf2=%hX",i-1,tp->rx_ring[i-1].buf_addr_1,tp->rx_ring[i-1].buf_addr_2); */

    /* The Tx buffer descriptor is filled in as needed, but we
       do need to clear the ownership bit. */

    for (i = 0; i < TX_RING_SIZE; i++)
    {

        tp->tx_ring[i].tx_status.lw = 0;
        tp->tx_ring[i].tx_ctrl.lw = 0x00e08000;
        tp->tx_ring[i].buf_addr_1 = virt_to_bus (tp->tx_buffs[i]);
        tp->tx_ring[i].buf_addr_2 = virt_to_bus (&tp->tx_ring[i + 1]);
        /* printf("[%d]buf1=%hX,buf2=%hX",i,tp->tx_ring[i].buf_addr_1,tp->tx_ring[i].buf_addr_2); */
    }

    tp->tx_ring[i - 1].buf_addr_2 = virt_to_bus (&tp->tx_ring[0]);
    /* printf("[%d]buf1=%hX,buf2=%hX",i,tp->tx_ring[i-1].buf_addr_1,tp->tx_ring[i-1].buf_addr_2); */
}

int
QueryAuto (int ioaddr)
{
    int byMIIIndex;
    int MIIReturn;

        int advertising,mii_reg5;
        int negociated;

    byMIIIndex = 0x04;
    MIIReturn = ReadMII (byMIIIndex, ioaddr);
        advertising=MIIReturn;

    byMIIIndex = 0x05;
    MIIReturn = ReadMII (byMIIIndex, ioaddr);
        mii_reg5=MIIReturn;

        negociated=mii_reg5 & advertising;

        if ( (negociated & 0x100) || (negociated & 0x1C0) == 0x40 )
                return 1;
        else
                return 0;

}

int
ReadMII (int byMIIIndex, int ioaddr)
{
    int ReturnMII;
    char byMIIAdrbak;
    char byMIICRbak;
    char byMIItemp;
    unsigned long ct;

    byMIIAdrbak = inb (byMIIAD);
    byMIICRbak = inb (byMIICR);
    outb (byMIICRbak & 0x7f, byMIICR);
    MIIDelay ();

    outb (byMIIIndex, byMIIAD);
    MIIDelay ();

    outb (inb (byMIICR) | 0x40, byMIICR);

    byMIItemp = inb (byMIICR);
    byMIItemp = byMIItemp & 0x40;

    ct = currticks();
    while (byMIItemp != 0 && ct + 2*1000 < currticks())
    {
        byMIItemp = inb (byMIICR);
        byMIItemp = byMIItemp & 0x40;
    }
    MIIDelay ();

    ReturnMII = inw (wMIIDATA);

    outb (byMIIAdrbak, byMIIAD);
    outb (byMIICRbak, byMIICR);
    MIIDelay ();

    return (ReturnMII);

}

void
WriteMII (char byMIISetByte, char byMIISetBit, char byMIIOP, int ioaddr)
{
    int ReadMIItmp;
    int MIIMask;
    char byMIIAdrbak;
    char byMIICRbak;
    char byMIItemp;
    unsigned long ct;


    byMIIAdrbak = inb (byMIIAD);

    byMIICRbak = inb (byMIICR);
    outb (byMIICRbak & 0x7f, byMIICR);
    MIIDelay ();
    outb (byMIISetByte, byMIIAD);
    MIIDelay ();

    outb (inb (byMIICR) | 0x40, byMIICR);

    byMIItemp = inb (byMIICR);
    byMIItemp = byMIItemp & 0x40;

    ct = currticks();
    while (byMIItemp != 0 && ct + 2*1000 < currticks())
    {
        byMIItemp = inb (byMIICR);
        byMIItemp = byMIItemp & 0x40;
    }
    MIIDelay ();

    ReadMIItmp = inw (wMIIDATA);
    MIIMask = 0x0001;
    MIIMask = MIIMask << byMIISetBit;


    if (byMIIOP == 0)
    {
        MIIMask = ~MIIMask;
        ReadMIItmp = ReadMIItmp & MIIMask;
    }
    else
    {
        ReadMIItmp = ReadMIItmp | MIIMask;

    }
    outw (ReadMIItmp, wMIIDATA);
    MIIDelay ();

    outb (inb (byMIICR) | 0x20, byMIICR);
    byMIItemp = inb (byMIICR);
    byMIItemp = byMIItemp & 0x20;

    ct = currticks();
    while (byMIItemp != 0 && ct + 2*1000 < currticks())
    {
        byMIItemp = inb (byMIICR);
        byMIItemp = byMIItemp & 0x20;
    }
    MIIDelay ();

    outb (byMIIAdrbak & 0x7f, byMIIAD);
    outb (byMIICRbak, byMIICR);
    MIIDelay ();

}

void
MIIDelay (void)
{
    int i;
    for (i = 0; i < 0x7fff; i++)
    {
        ( void ) inb (0x61);
        ( void ) inb (0x61);
        ( void ) inb (0x61);
        ( void ) inb (0x61);
    }
}

/* Offsets to the device registers. */
enum register_offsets {
        StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
        IntrStatus=0x0C, IntrEnable=0x0E,
        MulticastFilter0=0x10, MulticastFilter1=0x14,
        RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
        MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
        MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
        ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
        RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
        StickyHW=0x83, IntrStatus2=0x84, WOLcrClr=0xA4, WOLcgClr=0xA7,
        PwrcsrClr=0xAC,
};

/* Bits in the interrupt status/mask registers. */
enum intr_status_bits {
        IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
        IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
        IntrPCIErr=0x0040,
        IntrStatsMax=0x0080, IntrRxEarly=0x0100,
        IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
        IntrTxAborted=0x2000, IntrLinkChange=0x4000,
        IntrRxWakeUp=0x8000,
        IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
        IntrTxDescRace=0x080000,        /* mapped from IntrStatus2 */
        IntrTxErrSummary=0x082218,
};
#define DEFAULT_INTR (IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | \
                   IntrRxDropped | IntrRxNoBuf) 

/***************************************************************************
 IRQ - PXE IRQ Handler
***************************************************************************/
void rhine_irq ( struct nic *nic, irq_action_t action ) {
    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    /* Enable interrupts by setting the interrupt mask. */
    unsigned int intr_status;

    switch ( action ) {
        case DISABLE :
        case ENABLE :
            intr_status = inw(nic->ioaddr + IntrStatus);
            /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */

            /* added comment by guard */
            /* For supporting VT6107, please use revision id to recognize different chips in driver */
            // if (tp->chip_id == 0x3065)
            if( tp->chip_revision < 0x80 && tp->chip_revision >=0x40 )
                intr_status |= inb(nic->ioaddr + IntrStatus2) << 16;
                intr_status = (intr_status & ~DEFAULT_INTR);
                if ( action == ENABLE ) 
                    intr_status = intr_status | DEFAULT_INTR;
                    outw(intr_status, nic->ioaddr + IntrEnable);
                break;
        case FORCE :
            outw(0x0010, nic->ioaddr + 0x84);
           break;
        }
}

static struct nic_operations rhine_operations;

static int
rhine_probe ( struct nic *nic, struct pci_device *pci ) {

    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;

    if (!pci->ioaddr)
        return 0;

    rhine_probe1 (nic, pci, pci->ioaddr, pci->device, -1);

    adjust_pci_device ( pci );

    rhine_reset (nic);

    nic->nic_op = &rhine_operations;

    nic->irqno    = pci->irq;
    nic->ioaddr   = tp->ioaddr;

    return 1;
}

static void set_rx_mode(struct nic *nic __unused) {
        struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
        unsigned char rx_mode;
        int ioaddr = tp->ioaddr;

        /* ! IFF_PROMISC */
        outl(0xffffffff, byMAR0);
        outl(0xffffffff, byMAR4);
        rx_mode = 0x0C;

        outb(0x60 /* thresh */ | rx_mode, byRCR );
}

static void
rhine_probe1 (struct nic *nic, struct pci_device *pci, int ioaddr, int chip_id, int options)
{
    struct rhine_private *tp;
    static int did_version = 0; /* Already printed version info. */
    unsigned int i, ww;
    unsigned int timeout;
    int FDXFlag;
    int byMIIvalue, LineSpeed, MIICRbak;
    uint8_t revision_id;    
    unsigned char mode3_reg;

    if (rhine_debug > 0 && did_version++ == 0)
        printf ("%s",version);

    // get revision id.
    pci_read_config_byte(pci, PCI_REVISION, &revision_id);

    /* D-Link provided reset code (with comment additions) */
    if (revision_id >= 0x40) {
        unsigned char byOrgValue;
        
        if(rhine_debug > 0)
                printf("Enabling Sticky Bit Workaround for Chip_id: 0x%hX\n"
                                , chip_id);
        /* clear sticky bit before reset & read ethernet address */
        byOrgValue = inb(bySTICKHW);
        byOrgValue = byOrgValue & 0xFC;
        outb(byOrgValue, bySTICKHW);

        /* (bits written are cleared?) */
        /* disable force PME-enable */
        outb(0x80, byWOLcgClr);
        /* disable power-event config bit */
        outb(0xFF, byWOLcrClr);
        /* clear power status (undocumented in vt6102 docs?) */
        outb(0xFF, byPwrcsrClr);
        
    }

    /* Reset the chip to erase previous misconfiguration. */
    outw(CR_SFRST, byCR0);
    // if vt3043 delay after reset
    if (revision_id <0x40) {
       udelay(10000);
    }
    // polling till software reset complete
    // W_MAX_TIMEOUT is the timeout period
    for(ww = 0; ww < W_MAX_TIMEOUT; ww++) {
        if ((inw(byCR0) & CR_SFRST) == 0)
                break;
        }

    // issue AUTOLoad in EECSR to reload eeprom
    outb(0x20, byEECSR );

    // if vt3065 delay after reset
    if (revision_id >=0x40) {
        // delay 8ms to let MAC stable
        mdelay(8);
        /*
         * for 3065D, EEPROM reloaded will cause bit 0 in MAC_REG_CFGA
         * turned on.  it makes MAC receive magic packet
         * automatically. So, we turn it off. (D-Link)
         */
         outb(inb(byCFGA) & 0xFE, byCFGA);
    }

    /* turn on bit2 in PCI configuration register 0x53 , only for 3065*/
    if (revision_id >= 0x40) {
        pci_read_config_byte(pci, PCI_REG_MODE3, &mode3_reg);
        pci_write_config_byte(pci, PCI_REG_MODE3, mode3_reg|MODE3_MIION);
    }


    /* back off algorithm ,disable the right-most 4-bit off CFGD*/
    outb(inb(byCFGD) & (~(CFGD_RANDOM | CFGD_CFDX | CFGD_CEREN | CFGD_CETEN)), byCFGD);

    /* reload eeprom */
    reload_eeprom(ioaddr);

    /* Perhaps this should be read from the EEPROM? */
    for (i = 0; i < ETH_ALEN; i++)
        nic->node_addr[i] = inb (byPAR0 + i);

    DBG ( "IO address %#hX Ethernet Address: %s\n", ioaddr, eth_ntoa ( nic->node_addr ) );

    /* restart MII auto-negotiation */
    WriteMII (0, 9, 1, ioaddr);
    printf ("Analyzing Media type,this may take several seconds... ");
    for (i = 0; i < 5; i++)
    {
        /* need to wait 1 millisecond - we will round it up to 50-100ms */
        timeout = currticks() + 2;
        for (timeout = currticks() + 2; currticks() < timeout;)
            /* nothing */;
        if (ReadMII (1, ioaddr) & 0x0020)
            break;
    }
    printf ("OK.\n");

#if 0
        /* JJM : for Debug */
        printf("MII : Address %hhX ",inb(ioaddr+0x6c));
        {
         unsigned char st1,st2,adv1,adv2,l1,l2;
        
         st1=ReadMII(1,ioaddr)>>8;
         st2=ReadMII(1,ioaddr)&0xFF;
         adv1=ReadMII(4,ioaddr)>>8;
         adv2=ReadMII(4,ioaddr)&0xFF;
         l1=ReadMII(5,ioaddr)>>8;
         l2=ReadMII(5,ioaddr)&0xFF;
         printf(" status 0x%hhX%hhX, advertising 0x%hhX%hhX, link 0x%hhX%hhX\n", st1,st2,adv1,adv2,l1,l2);
        }
#endif

    
    /* query MII to know LineSpeed,duplex mode */
    byMIIvalue = inb (ioaddr + 0x6d);
    LineSpeed = byMIIvalue & MIISR_SPEED;
    if (LineSpeed != 0)                                         //JJM
    {
        printf ("Linespeed=10Mbs");
    }
    else
    {
        printf ("Linespeed=100Mbs");
    }
        
    FDXFlag = QueryAuto (ioaddr);
    if (FDXFlag == 1)
    {
        printf (" Fullduplex\n");
        outw (CR_FDX, byCR0);
    }
    else
    {
        printf (" Halfduplex\n");
    }


    /* set MII 10 FULL ON, only apply in vt3043 */
    if(chip_id == 0x3043)
        WriteMII (0x17, 1, 1, ioaddr);

    /* turn on MII link change */
    MIICRbak = inb (byMIICR);
    outb (MIICRbak & 0x7F, byMIICR);
    MIIDelay ();
    outb (0x41, byMIIAD);
    MIIDelay ();

    /* while((inb(byMIIAD)&0x20)==0) ; */
    outb (MIICRbak | 0x80, byMIICR);

    nic->priv_data = &rhine;
    tp = &rhine;
    tp->chip_id = chip_id;
    tp->ioaddr = ioaddr;
    tp->phys[0] = -1;
    tp->chip_revision = revision_id;

    /* The lower four bits are the media type. */
    if (options > 0)
    {
        tp->full_duplex = (options & 16) ? 1 : 0;
        tp->default_port = options & 15;
        if (tp->default_port)
            tp->medialock = 1;
    }
    return;
}

static void 
rhine_disable ( struct nic *nic ) {

    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    int ioaddr = tp->ioaddr;

    rhine_reset(nic);

    printf ("rhine disable\n");
    /* Switch to loopback mode to avoid hardware races. */
    outb(0x60 | 0x01, byTCR);
    /* Stop the chip's Tx and Rx processes. */
    outw(CR_STOP, byCR0);
}

/**************************************************************************
ETH_RESET - Reset adapter
***************************************************************************/
static void
rhine_reset (struct nic *nic)
{
    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    int ioaddr = tp->ioaddr;
    int i, j;
    int FDXFlag, CRbak;
    void *rx_ring_tmp;
    void *tx_ring_tmp;
    void *rx_bufs_tmp;
    void *tx_bufs_tmp;
    unsigned long rx_ring_tmp1;
    unsigned long tx_ring_tmp1;
    unsigned long rx_bufs_tmp1;
    unsigned long tx_bufs_tmp1;

    /* printf ("rhine_reset\n"); */
    /* Soft reset the chip. */
    /*outb(CmdReset, ioaddr + ChipCmd); */

    tx_bufs_tmp = rhine_buffers.txbuf;
    tx_ring_tmp = rhine_buffers.txdesc;
    rx_bufs_tmp = rhine_buffers.rxbuf;
    rx_ring_tmp = rhine_buffers.rxdesc;

    /* tune RD TD 32 byte alignment */
    rx_ring_tmp1 = virt_to_bus ( rx_ring_tmp );
    j = (rx_ring_tmp1 + 32) & (~0x1f);
    /* printf ("txring[%d]", j); */
    tp->rx_ring = (struct rhine_rx_desc *) bus_to_virt (j);

    tx_ring_tmp1 = virt_to_bus ( tx_ring_tmp );
    j = (tx_ring_tmp1 + 32) & (~0x1f);
    tp->tx_ring = (struct rhine_tx_desc *) bus_to_virt (j);
    /* printf ("rxring[%X]", j); */


    tx_bufs_tmp1 = virt_to_bus ( tx_bufs_tmp );
    j = (int) (tx_bufs_tmp1 + 32) & (~0x1f);
    tx_bufs_tmp = bus_to_virt (j);
    /* printf ("txb[%X]", j); */

    rx_bufs_tmp1 = virt_to_bus ( rx_bufs_tmp );
    j = (int) (rx_bufs_tmp1 + 32) & (~0x1f);
    rx_bufs_tmp = bus_to_virt (j);
    /* printf ("rxb[%X][%X]", rx_bufs_tmp1, j); */

    for (i = 0; i < RX_RING_SIZE; i++)
    {
        tp->rx_buffs[i] = (char *) rx_bufs_tmp;
        /* printf("r[%X]",tp->rx_buffs[i]); */
        rx_bufs_tmp += 1536;
    }

    for (i = 0; i < TX_RING_SIZE; i++)
    {
        tp->tx_buffs[i] = (char *) tx_bufs_tmp;
        /* printf("t[%X]",tp->tx_buffs[i]);  */
        tx_bufs_tmp += 1536;
    }

    /* software reset */
    outb (CR1_SFRST, byCR1);
    MIIDelay ();

    /* printf ("init ring"); */
    rhine_init_ring (nic);
    /*write TD RD Descriptor to MAC */
    outl (virt_to_bus (tp->rx_ring), dwCurrentRxDescAddr);
    outl (virt_to_bus (tp->tx_ring), dwCurrentTxDescAddr);

    /* Setup Multicast */       
    set_rx_mode(nic);

    /* set TCR RCR threshold to store and forward*/
    outb (0x3e, byBCR0);
    outb (0x38, byBCR1);
    outb (0x2c, byRCR);
    outb (0x60, byTCR);
    /* Set Fulldupex */
    FDXFlag = QueryAuto (ioaddr);
    if (FDXFlag == 1)
    {
        outb (CFGD_CFDX, byCFGD);
        outw (CR_FDX, byCR0);
    }

    /* KICK NIC to WORK */
    CRbak = inw (byCR0);
    CRbak = CRbak & 0xFFFB;     /* not CR_STOP */
    outw ((CRbak | CR_STRT | CR_TXON | CR_RXON | CR_DPOLL), byCR0);

    /* disable all known interrupt */
    outw (0, byIMR0);
}
/* Beware of PCI posted writes */
#define IOSYNC  do { inb(nic->ioaddr + StationAddr); } while (0)

static int
rhine_poll (struct nic *nic, int retreive)
{
    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    int rxstatus, good = 0;;

    if (tp->rx_ring[tp->cur_rx].rx_status.bits.own_bit == 0)
    {
        unsigned int intr_status;
        /* There is a packet ready */
        if(!retreive)
            return 1;

        intr_status = inw(nic->ioaddr + IntrStatus);
        /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
#if 0
        if (tp->chip_id == 0x3065)
          intr_status |= inb(nic->ioaddr + IntrStatus2) << 16;
#endif
        /* Acknowledge all of the current interrupt sources ASAP. */
        if (intr_status & IntrTxDescRace)
           outb(0x08, nic->ioaddr + IntrStatus2);
        outw(intr_status & 0xffff, nic->ioaddr + IntrStatus);
        IOSYNC;

        rxstatus = tp->rx_ring[tp->cur_rx].rx_status.lw;
        if ((rxstatus & 0x0300) != 0x0300)
        {
            printf("rhine_poll: bad status\n");
        }
        else if (rxstatus & (RSR_ABNORMAL))
        {
            printf ("rxerr[%X]\n", rxstatus);
        }
        else
            good = 1;

        if (good)
        {
            nic->packetlen = tp->rx_ring[tp->cur_rx].rx_status.bits.frame_length;
            memcpy (nic->packet, tp->rx_buffs[tp->cur_rx], nic->packetlen);
            /* printf ("Packet RXed\n"); */
        }
        tp->rx_ring[tp->cur_rx].rx_status.bits.own_bit = 1;
        tp->cur_rx++;
        tp->cur_rx = tp->cur_rx % RX_RING_SIZE;
    }
        /* Acknowledge all of the current interrupt sources ASAP. */
        outw(DEFAULT_INTR & ~IntrRxDone, nic->ioaddr + IntrStatus);

        IOSYNC;

    return good;
}

static void
rhine_transmit (struct nic *nic,
                const char *d, unsigned int t, unsigned int s, const char *p)
{
    struct rhine_private *tp = (struct rhine_private *) nic->priv_data;
    int ioaddr = tp->ioaddr;
    int entry;
    unsigned char CR1bak;
    unsigned char CR0bak;
    unsigned int nstype;
    unsigned long ct;


    /*printf ("rhine_transmit\n"); */
    /* setup ethernet header */


    /* Calculate the next Tx descriptor entry. */
    entry = tp->cur_tx % TX_RING_SIZE;

    memcpy (tp->tx_buffs[entry], d, ETH_ALEN);  /* dst */
    memcpy (tp->tx_buffs[entry] + ETH_ALEN, nic->node_addr, ETH_ALEN);  /* src */
    
    nstype=htons(t);
    memcpy(tp->tx_buffs[entry] + 2 * ETH_ALEN, (char*)&nstype, 2);

    memcpy (tp->tx_buffs[entry] + ETH_HLEN, p, s);
    s += ETH_HLEN;
    while (s < ETH_ZLEN)
        *((char *) tp->tx_buffs[entry] + (s++)) = 0;

    tp->tx_ring[entry].tx_ctrl.bits.tx_buf_size = s;

    tp->tx_ring[entry].tx_status.bits.own_bit = 1;


    CR1bak = inb (byCR1);

    CR1bak = CR1bak | CR1_TDMD1;
    /*printf("tdsw=[%X]",tp->tx_ring[entry].tx_status.lw); */
    /*printf("tdcw=[%X]",tp->tx_ring[entry].tx_ctrl.lw); */
    /*printf("tdbuf1=[%X]",tp->tx_ring[entry].buf_addr_1); */
    /*printf("tdbuf2=[%X]",tp->tx_ring[entry].buf_addr_2); */
    /*printf("td1=[%X]",inl(dwCurrentTDSE0)); */
    /*printf("td2=[%X]",inl(dwCurrentTDSE1)); */
    /*printf("td3=[%X]",inl(dwCurrentTDSE2)); */
    /*printf("td4=[%X]",inl(dwCurrentTDSE3)); */

    outb (CR1bak, byCR1);
    do
    {
        ct = currticks();
        /* Wait until transmit is finished or timeout*/
        while((tp->tx_ring[entry].tx_status.bits.own_bit !=0) &&
                ct + 10*1000 < currticks())
        ;

        if(tp->tx_ring[entry].tx_status.bits.terr == 0)
            break;

        if(tp->tx_ring[entry].tx_status.bits.abt == 1)
        {
            // turn on TX
            CR0bak = inb(byCR0);
            CR0bak = CR0bak|CR_TXON;
            outb(CR0bak,byCR0);
        }
    }while(0);
    tp->cur_tx++;

    /*outw(IMRShadow,byIMR0); */
    /*dev_kfree_skb(tp->tx_skbuff[entry], FREE_WRITE); */
    /*tp->tx_skbuff[entry] = 0; */
}

static struct nic_operations rhine_operations = {
        .connect        = dummy_connect,
        .poll           = rhine_poll,
        .transmit       = rhine_transmit,
        .irq            = rhine_irq,

};

static struct pci_device_id rhine_nics[] = {
PCI_ROM(0x1106, 0x3065, "dlink-530tx",     "VIA 6102", 0),
PCI_ROM(0x1106, 0x3106, "via-rhine-6105",  "VIA 6105", 0),
PCI_ROM(0x1106, 0x3043, "dlink-530tx-old", "VIA 3043", 0),              /* Rhine-I 86c100a */
PCI_ROM(0x1106, 0x3053, "via6105m",        "VIA 6105M", 0),
PCI_ROM(0x1106, 0x6100, "via-rhine-old",   "VIA 86C100A", 0),   /* Rhine-II */
};

PCI_DRIVER ( rhine_driver, rhine_nics, PCI_NO_CLASS );

DRIVER ( "VIA 86C100", nic_driver, pci_driver, rhine_driver,
         rhine_probe, rhine_disable );

/* EOF via-rhine.c */

/*
 * Local variables:
 *  c-basic-offset: 8
 *  c-indent-level: 8
 *  tab-width: 8
 * End:
 */