source: npl/internetserver/apache_conf/root/etc/apache2/httpd.conf @ c5c522c

# Syn-3 apache configfile.
# Please do not edit this file directorly, but 
# add a .conf file in /etc/apache2/conf.d/
# CHANGES IN THIS FILE WILL BE LOST AFTER AN UPDATE!

#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module lib/apache2/mod_authn_file.so
LoadModule authn_dbm_module lib/apache2/mod_authn_dbm.so
LoadModule authn_anon_module lib/apache2/mod_authn_anon.so
LoadModule authn_dbd_module lib/apache2/mod_authn_dbd.so
LoadModule authn_core_module lib/apache2/mod_authn_core.so
LoadModule authz_host_module lib/apache2/mod_authz_host.so
LoadModule authz_groupfile_module lib/apache2/mod_authz_groupfile.so
LoadModule authz_user_module lib/apache2/mod_authz_user.so
LoadModule authz_dbm_module lib/apache2/mod_authz_dbm.so
LoadModule authz_owner_module lib/apache2/mod_authz_owner.so
LoadModule authz_core_module lib/apache2/mod_authz_core.so
LoadModule auth_basic_module lib/apache2/mod_auth_basic.so
LoadModule auth_digest_module lib/apache2/mod_auth_digest.so
LoadModule dbd_module lib/apache2/mod_dbd.so
LoadModule dumpio_module lib/apache2/mod_dumpio.so
LoadModule ext_filter_module lib/apache2/mod_ext_filter.so
LoadModule include_module lib/apache2/mod_include.so
LoadModule filter_module lib/apache2/mod_filter.so
LoadModule deflate_module lib/apache2/mod_deflate.so
LoadModule log_config_module lib/apache2/mod_log_config.so
#LoadModule log_forensic_module lib/apache2/mod_log_forensic.so
LoadModule logio_module lib/apache2/mod_logio.so
LoadModule env_module lib/apache2/mod_env.so
#LoadModule mime_magic_module lib/apache2/mod_mime_magic.so
#LoadModule cern_meta_module lib/apache2/mod_cern_meta.so
LoadModule expires_module lib/apache2/mod_expires.so
LoadModule headers_module lib/apache2/mod_headers.so
#LoadModule ident_module lib/apache2/mod_ident.so
#LoadModule usertrack_module lib/apache2/mod_usertrack.so
LoadModule unique_id_module lib/apache2/mod_unique_id.so
LoadModule setenvif_module lib/apache2/mod_setenvif.so
LoadModule version_module lib/apache2/mod_version.so
LoadModule ssl_module lib/apache2/mod_ssl.so
LoadModule mime_module lib/apache2/mod_mime.so
LoadModule dav_module lib/apache2/mod_dav.so
LoadModule status_module lib/apache2/mod_status.so
LoadModule autoindex_module lib/apache2/mod_autoindex.so
#LoadModule asis_module lib/apache2/mod_asis.so
LoadModule info_module lib/apache2/mod_info.so
LoadModule dav_fs_module lib/apache2/mod_dav_fs.so
LoadModule vhost_alias_module lib/apache2/mod_vhost_alias.so
LoadModule negotiation_module lib/apache2/mod_negotiation.so
LoadModule dir_module lib/apache2/mod_dir.so
#LoadModule imagemap_module lib/apache2/mod_imagemap.so
LoadModule actions_module lib/apache2/mod_actions.so
LoadModule speling_module lib/apache2/mod_speling.so
#LoadModule userdir_module lib/apache2/mod_userdir.so
LoadModule alias_module lib/apache2/mod_alias.so
LoadModule rewrite_module lib/apache2/mod_rewrite.so


#EDWIN:Gebruik cgid bij workerthread en cgi bij prefork!
#LoadModule cgid_module lib/apache2/mod_cgid.so
#LoadModule cgi_module lib/apache2/mod_cgi.so

#apache2.4:
LoadModule unixd_module lib/apache2/mod_unixd.so
LoadModule access_compat_module lib/apache2/mod_access_compat.so
LoadModule socache_shmcb_module lib/apache2/mod_socache_shmcb.so

<IfModule !mpm_winnt_module>
<IfModule !mpm_netware_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User nobody
Group nogroup
</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin root

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride FileInfo AuthConfig Limit Indexes

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog /var/log/apache2/access_log common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog /var/log/apache2/access_log combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock /var/run/cgisock
</IfModule>

#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>


<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig /etc/apache2/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For files that include their own HTTP headers:
    #AddHandler send-as-is asis

    # For server-parsed imagemap files:
    #AddHandler imap-file map

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /etc/apache2/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
EnableMMAP on
EnableSendfile on

# Syn-3 LDAP caching settings
# For now we use a small value of 10 seconds to prevent confusion and delays.
# If performance issues arrise Syn-3 dev. team will issue an update with a higher value.
LoadModule ldap_module    lib/apache2/mod_ldap.so
LDAPCacheTTL 10
LDAPOpCacheTTL 10


# Supplemental configuration
# All configs in conf.d will be included.
# Look overthere for more info, and add your own configuration there as well. 
Include /etc/apache2/conf.d/*.conf