source: npl/mailserver/dspam/dspam.conf @ 105afb5

## dspam.conf -- DSPAM configuration file
##

#
# DSPAM Home: Specifies the base directory to be used for DSPAM storage
#
Home /home/system/dspam

#
# Trusted Delivery Agent: Specifies the local delivery agent DSPAM should call 
# when delivering mail as a trusted user. Use %u to specify the user DSPAM is 
# processing mail for. It is generally a good idea to allow the MTA to specify 
# the pass-through arguments at run-time, but they may also be specified here.
#
# Most operating system defaults:
#TrustedDeliveryAgent "/usr/bin/procmail"       # Linux
#TrustedDeliveryAgent "/usr/bin/mail"           # Solaris
#TrustedDeliveryAgent "/usr/libexec/mail.local" # FreeBSD
#TrustedDeliveryAgent "/usr/bin/procmail"       # Cygwin
#
# Other popular configurations:
#TrustedDeliveryAgent "/usr/cyrus/bin/deliver"  # Cyrus
#TrustedDeliveryAgent "/bin/maildrop"           # Maildrop
#TrustedDeliveryAgent "/usr/local/sbin/exim -oMr spam-scanned" # Exim
#
TrustedDeliveryAgent "/usr/cyrus/bin/deliver -a %u %u"

#
# Untrusted Delivery Agent: Specifies the local delivery agent and arguments
# DSPAM should use when delivering mail and running in untrusted user mode.
# Because DSPAM will not allow pass-through arguments to be specified to 
# untrusted users, all arguments should be specified here. Use %u to specify
# the user DSPAM is processing mail for. This configuration parameter is only 
# necessary if you plan on allowing untrusted processing.
#
#UntrustedDeliveryAgent "/usr/bin/procmail -d %u"

#
# SMTP or LMTP Delivery: Alternatively, you may wish to use SMTP or LMTP 
# delivery to deliver your message to the mail server. You will need to 
# configure with --enable-daemon to use host delivery, however you do not need 
# to operate in daemon mode. Specify an IP address or UNIX path to a domain 
# socket below as a host.
#
#DeliveryHost        127.0.0.1
#DeliveryPort        24
#DeliveryIdent       localhost
#DeliveryProto       LMTP

#
# Quarantine Agent: DSPAM's default behavior is to quarantine all mail it 
# thinks is spam. If you wish to override this behavior, you may specify
# a quarantine agent which will be called with all messages DSPAM thinks is
# spam. Use %u to specify the user DSPAM is processing mail for.
#
QuarantineAgent "/usr/cyrus/bin/deliver -a %u -m Spam %u"

#
# OnFail: What to do if local delivery or quarantine should fail. If set
# to "unlearn", DSPAM will unlearn the message prior to exiting with an
# un successful return code. The default option, "error" will not unlearn
# the message but return the appropriate error code. The unlearn option
# is use-ful on some systems where local delivery failures will cause the
# message to be requeued for delivery, and could result in the message
# being processed multiple times. During a very large failure, however, 
# this could cause a significant load increase.
#
OnFail error

# Trusted Users: Only the users specified below will be allowed to perform
# administrative functions in DSPAM such as setting the active user and
# accessing tools. All other users attempting to run DSPAM will be restricted;
# their uids will be forced to match the active username and they will not be
# able to specify delivery agent privileges or use tools.
#
Trust root
Trust mail
Trust mailnull 
Trust smmsp
Trust daemon
#Trust nobody
#Trust majordomo

#
# Debugging: Enables debugging for some or all users. IMPORTANT: DSPAM must
# be compiled with debug support in order to use this option. DSPAM should
# never be running in production with debug active unless you are 
# troubleshooting problems.
#
# DebugOpt: One or more of: process, classify, spam, fp, inoculation, corpus
#   process     standard message processing
#   classify    message classification using --classify
#   spam        error correction of missed spam
#   fp          error correction of false positives
#   inoculation message inoculations (source=inoculation)
#   corpus      corpusfed messages (source=corpus)
#
#Debug *
#Debug bob bill
#
#DebugOpt process spam fp

#
# Training Mode: The default training mode to use for all operations, when
# one has not been specified on the commandline or in the user's preferences.
# Acceptable values are: toe, tum, teft, notrain
#
TrainingMode teft

#
# Features: Specify features to activate by default; can also be specified
# on the commandline. See the documentation for a list of available features.
# If _any_ features are specified on the commandline, these are ignored.
#
Feature whitelist
Feature noise

# Training Buffer: The training buffer waters down statistics during training.
# It is designed to prevent false positives, but can also dramatically reduce
# dspam's catch rate during initial training. This can be a number from 0
# (no buffering) to 10 (maximum buffering). If you are paranoid about false
# positives, you should probably enable this option.
#
Feature tb=4


# Algorithms: Specify the statistical algorithms to use, overriding any
# defaults configured in the build. The options are:
#    naive       Naive-Bayesian (All Tokens)
#    graham      Graham-Bayesian ("A Plan for Spam")
#    burton      Burton-Bayesian (SpamProbe)
#    robinson    Robinson's Geometric Mean Test (Obsolete)
#    chi-square  Fisher-Robinson's Chi-Square Algorithm
#
# You may have multiple algorithms active simultaneously, but it is strongly
# recommended that you group Bayesian algorithms with other Bayesian
# algorithms, and any use of Chi-Square remain exclusive.
#
# NOTE: For standard "CRM114" Markovian weighting, use 'naive', or consider
#       using 'burton' for slightly better accuracy
#
# Don't mess with this unless you know what you're doing
#
Algorithm graham burton

#
# Tokenizer: Specify the tokenizer to use. The tokenizer is the piece
# responsible for parsing the message into individual tokens. Depending on
# how many resources you are willing to trade off vs. accuracy, you may
# choose to use a less or more detailed tokenizer:
#   word    uniGram (single word) tokenizer
#           Tokenizes message into single individual words/tokens
#           example: "free" and "viagra"
#   chain   biGram (chained tokens) tokenizer (default)
#           Single words + chains adjacent tokens together
#           example: "free" and "viagra" and "free viagra"
#   sbph    Sparse Binary Polynomial Hashing tokenizer
#           Creates sparse token patterns across sliding window of 5-tokens
#           example: "the quick * fox jumped" and "the * * fox jumped"
#   osb     Orthogonal Sparse biGram tokenizer
#           Similar to SBPH, but only uses the biGrams
#           example: "the * * fox" and "the * * * jumped"
#
Tokenizer chain


#
# PValue: Specify the technique used for calculating Probability Values, 
# overriding any defaults configured in the build. These options are:
#    bcr         Bayesian Chain Rule (Graham's Technique - "A Plan for Spam")
#    robinson    Robinson's Technique (used in Chi-Square) 
#    markov      Markovian Weighted Technique (for Markovian discrimination)
#
# Unlike the "Algorithms" property, you may only have one of these defined. 
# Use of the chi-square algorithm automatically changes this to robinson.
#
# Don't mess with this unless you know what you're doing.
#
PValue bcr

# WebStats: Enable this if you are using the CGI, which writes .stats files
WebStats on



#
# Preferences: Specify any preferences to set by default, unless otherwise
# overridden by the user (see next section) or a default.prefs file.
# If user or default.prefs are found, the user's preferences will override any
# defaults.
#
Preference "spamAction=quarantine"
Preference "signatureLocation=headers"  # 'message' or 'headers'
Preference "showFactors=on"
#Preference "spamAction=tag"
Preference "spamSubject=[ SPAM ]"

#
# Overrides: Specifies the user preferences which may override configuration
# and commandline defaults. Any other preferences supplied by an untrusted user
# will be ignored.
#
AllowOverride enableBNR
AllowOverride enableWhitelist
AllowOverride fallbackDomain
AllowOverride ignoreGroups
AllowOverride ignoreRBLLookups
AllowOverride localStore
AllowOverride makeCorpus
AllowOverride optIn
AllowOverride optOut
AllowOverride optOutClamAV
AllowOverride processorBias
AllowOverride RBLInoculate
AllowOverride showFactors
AllowOverride signatureLocation
AllowOverride spamAction
AllowOverride spamSubject
AllowOverride statisticalSedation
AllowOverride storeFragments
AllowOverride tagNonspam
AllowOverride tagSpam
AllowOverride trainPristine
AllowOverride trainingMode
AllowOverride whitelistThreshold
AllowOverride dailyQuarantineSummary

#
# Storage driver settings: Specific to a particular storage driver. Uncomment
# the configuration specific to your installation, if applicable.
#
MySQLServer     /var/run/mysql/mysql.sock
#MySQLPort
MySQLUser               dspamdb
MySQLPass               %mysql_passwd%
MySQLDb                 dspamdb
#MySQLCompress          true

# If you're running DSPAM in client/server (daemon) mode, uncomment the
# setting below to override the default connection cache size (the number
# of connections the server pools between all clients). The connection cache
# represents the maximum number of database connections *available* and should
# be set based on the maximum number of concurrent connections you're likely
# to have. Each connection may be used by only one thread at a time, so all
# other threads _will block_ until another connection becomes available.
#
#MySQLConnectionCache   10

#PgSQLServer            127.0.0.1
#PgSQLPort              5432
#PgSQLUser              dspam
#PgSQLPass              changeme
#PgSQLDb                dspam

# If you're running DSPAM in client/server (daemon) mode, uncomment the
# setting below to override the default connection cache size (the number
# of connections the server pools between all clients).
#
#PgSQLConnectionCache   3

#OraServer       "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=PROD)))"
#OraUser         dspam
#OraPass         changeme
#OraSchema       dspam

#SQLitePragma   "synchronous = OFF"

#
# Optionally, you can specify storage profiles, and specify the server to
# use on the commandline with --profile. For example:
#
#Profile DECAlpha
#MySQLServer.DECAlpha   10.0.0.1
#MySQLPort.DECAlpha     3306
#MySQLUser.DECAlpha     dspam
#MySQLPass.DECAlpha     changeme
#MySQLDb.DECAlpha       dspam
#MySQLCompress.DECAlpha true
#
#Profile Sun420R
#MySQLServer.Sun420R    10.0.0.2
#MySQLPort.Sun420R      3306
#MySQLUser.Sun420R      dspam
#MySQLPass.Sun420R      changeme
#MySQLDb.Sun420R        dspam
#MySQLCompress.Sun420R  false
#
#DefaultProfile DECAlpha

#
# If you're using storage profiles, you can set failovers for each profile.
# Of course, if you'll be failing over to another database, that database
# must have the same information as the first. If you're using a global
# database with no training, this should be relatively simple. If you're
# configuring per-user data, however, you'll need to set up some type of
# replication between databases.
#
#Failover.DECAlpha      SUN420R
#Failover.Sun420R       DECAlpha

# If the storage fails, the agent will follow each profile's failover up to
# a maximum number of failover attempts. This should be set to a maximum of
# the number of profiles you have, otherwise the agent could loop and try
# the same profile multiple times (unless this is your desired behavior).
#
#FailoverAttempts       1

#
# Ignored headers: If DSPAM is behind other tools which may add a header to
# incoming emails, it may be beneficial to ignore these headers - especially
# if they are coming from another spam filter. If you are _not_ using one of
# these tools, however, leaving the appropriate headers commented out will
# allow DSPAM to use them as telltale signs of forged email.
#
#IgnoreHeader X-Spam-Status
#IgnoreHeader X-Spam-Scanned
#IgnoreHeader X-Virus-Scanner-Result

#
# Lookup: Perform lookups on streamlined blackhole list servers (see
# http://www.nuclearelephant.com/projects/sbl/). The streamlined blacklist
# server is machine-automated, unsupervised blacklisting system designed to
# provide real-time and highly accurate blacklisting based on network spread.
# When performing a lookup, DSPAM will automatically learn the inbound message 
# as spam if the source IP is listed. Until an official public SBL server is 
# available, this feature is only useful if you are running your own 
# streamlined blackhole list server for internal reporting among multiple mail 
# servers. Provide the name of the lookup zone below to use.
#
# This function performs standard reverse-octet.domain lookups, and while it
# will function with many RBLs, it's strongly discouraged to use those
# maintained by humans as they're often inaccurate and could hurt filter
# learning and accuracy.
#
#Lookup "sbl.yourdomain.com"

#
# Notifications: Enable the sending of notification emails to users (first
# message, quarantine full, etc.)
#
Notifications   on

#
# Purge configuration: Set dspam_clean purge default options, if not otherwise
# specified on the commandline
#
PurgeSignatures 14          # Stale signatures
PurgeNeutral    90          # Tokens with neutralish probabilities
PurgeUnused     90          # Unused tokens
PurgeHapaxes    30          # Tokens with less than 5 hits (hapaxes)
PurgeHits1S     15          # Tokens with only 1 spam hit
PurgeHits1I     15          # Tokens with only 1 innocent hit

#
# Purge configuration for SQL-based installations using purge.sql
#
#PurgeSignature off # Specified in purge.sql
#PurgeNeutral   90
#PurgeUnused    off # Specified in purge.sql
#PurgeHapaxes   off # Specified in purge.sql
#PurgeHits1S    off # Specified in purge.sql
#PurgeHits1I    off # Specified in purge.sql

#
# Local Mail Exchangers: Used for source address tracking, tells DSPAM which
# mail exchangers are local and therefore should be ignored in the Received:
# header when tracking the source of an email. Note: you should use the address
# of the host as appears between brackets [ ] in the Received header.
#
#LocalMX 127.0.0.1

#
# Logging: Disabling logging for users will make usage graphs unavailable to
# them. Disabling system logging will make admin graphs unavailable.
#
SystemLog on
UserLog   on

#
# TrainPristine: for systems where the original message remains server side 
# and can therefore be presented in pristine format for retraining. This option
# will cause DSPAM to cease all writing of signatures and DSPAM headers to the 
# message, and deliver the message in as pristine format as possible. This mode
# REQUIRES that the original message in its pristine format (as of delivery) 
# be presented for retraining, as in the case of webmail, imap, or other 
# applications where the message is actually kept server-side during reading, 
# and is preserved. DO NOT use this switch unless the original message can be 
# presented for retraining with the ORIGINAL HEADERS and NO MODIFICATIONS.
#
#TrainPristine on

#
# Opt: in or out; determines DSPAM's default filtering behavior. If this value
# is set to in, users must opt-in to filtering by dropping a .dspam file in
# /var/dspam/opt-in/user.dspam (or if you have homedirs configured, a .dspam
# folder in their home directory).  The default is opt-out, which means all 
# users will be filtered unless a .nodspam file is dropped in 
# /var/dspam/opt-out/user.nodspam
#
Opt out

#
# TrackSources: specify which (if any) source addresses to track and report
# them to syslog (mail.info). This is useful if you're running a firewall or
# blacklist and would like to use this information. Spam reporting also drops
# SBL blacklist files (see http://www.nuclearelephant.com/projects/sbl/). 
#
#TrackSources spam nonspam

#
# ParseToHeaders: In lieu of setting up individual aliases for each user,
# DSPAM can be configured to automatically parse the To: address for spam and
# false positive forwards. From there, it can be configured to either set the
# DSPAM user based on the username specified in the header and/or change the
# training class and source accordingly. The options below can be used to 
# customize most common types of header parsing behavior to avoid the need for
# multiple aliases, or if using LMTP, aliases entirely..
#
# ParseToHeader: Parse the To: headers of an incoming message. This must be
#                set to 'on' to use either of the following features.
# 
# ChangeModeOnParse: Automatically change the class (to spam or innocent)
#   depending on whether spam- or notspam- was specified, and change the source
#   to 'error'. This is convenient if you're not using aliases at all, but
#   are delivering via LMTP.
#
# ChangeUserOnParse: Automatically change the username to match that specified
#   in the To: header. For example, spam-bob@domain.tld will set the username
#   to bob, ignoring any --user passed in. This may not always be desirable if
#   you are using virtual email addresses as usernames.
#
#ParseToHeaders on
#ChangeModeOnParse on
#ChangeUserOnParse on

#
# Broken MTA Options: Some MTAs don't support the proper functionality
# necessary. In these cases you can activate certain features in DSPAM to
# compensate. 'returnCodes' causes DSPAM to return an exit code of 99 if
# the message is spam, 0 if not, or a negative code if an error has occured.
# Specifying 'case' causes DSPAM to force the input usernames to lowercase.
# Spceifying 'lineStripping' causes DSPAM to strip ^M's from messages passed
# in.
#
#Broken returnCodes
#Broken case
#Broken lineStripping

#
# MaxMessageSize: You may specify a maximum message size for DSPAM to process.
# If the message is larger than the maximum size, it will be delivered 
# without processing. Value is in bytes.
#
MaxMessageSize 4194304

#
# Daemonized Server: If you are running DSPAM as a daemonized server using
# --daemon, the following parameters will override the default. Use the
# ServerPass option to set up accounts for each client machine. The DSPAM
# server will process and deliver the message based on the parameters 
# specified. If you want the client machine to perform delivery, use
# the --stdout option in conjunction with a local setup. 
#
#ServerPort             24
ServerQueueSize 32
ServerPID              /var/run/dspam.pid

#
# ServerMode specifies the type of LMTP server to start. This can be one of:
#     dspam: DSPAM-proprietary DLMTP server, for communicating with dspamc
#  standard: Standard LMTP server, for communicating with Postfix or other MTA
#      auto: Speak both DLMTP and LMTP; auto-detect by ServerPass.IDENT
#
ServerMode dspam

# If supporting DLMTP (dspam) mode, dspam clients will require authentication 
# as they will be passing in parameters. The idents below will be used to
# determine which clients will be speaking DLMTP, so if you will be using
# both LMTP and DLMTP from the same host, be sure to use something other
# than the server's hostname below (which will be sent by the MTA during a 
# standard LMTP LHLO).
# 
ServerPass.localhost    "qprmnvdi5fpd324tjpe09"
#ServerPass.Relay2      "password"

# If supporting standard LMTP mode, server parameters will need to be specified
# here, as they will not be passed in by the mail server. The ServerIdent
# specifies the 250 response code ident sent back to connecting clients and
# should be set to the hostname of your server, or an alias.
#
# NOTE: If you specify --user in ServerParameters, the RCPT TO will be
#       used only for delivery, and not set as the active user for processing.
#
#ServerParameters       "--deliver=innocent -d %u"
#ServerIdent            "localhost.localdomain"

# If you wish to use a local domain socket instead of a TCP socket, uncomment
# the following. It is strongly recommended you use local domain sockets if
# you are running the client and server on the same machine, as it eliminates
# much of the bandwidth overhead.
#
ServerDomainSocketPath  "/tmp/dspam.sock"

#
# Client Mode: If you are running DSPAM in client/server mode, uncomment and
# set these variables. A ClientHost beginning with a / will be treated as
# a domain socket.
#
ClientHost      /tmp/dspam.sock
ClientIdent     "qprmnvdi5fpd324tjpe09@localhost"
#
#ClientHost     127.0.0.1
#ClientPort     24
#ClientIdent    "secret@Relay1"

#
# SBLQueue: Touch files in the SBL queue
# If you are a reporting streamlined blackhole list participant, you can
# touch ip addresses within the directory the sbl_client process is watching.
#
#RABLQueue      /var/spool/sbl

# ProcessorBias: Bias causes the filter to lean more toward 'innocent', and
# usually greatly reduces false positives. It is the default behavior of
# most Bayesian filters (including dspam). 
#
# NOTE: You probably DONT want this if you're using Markovian Weighting, unless
# you are paranoid about false positives.
#
ProcessorBias off

# TestConditionalTraining: By default, dspam will retrain certain errors
# until the condition is no longer met. This usually accelerates learning.
# Some people argue that this can increase the risk of errors, however.
TestConditionalTraining on

# ProcessorURLContext: By default, a URL context is generated for URLs, which
# records their tokens as separate from words found in documents. To use
# URL tokens in the same context as words, turn this feature off. 
#
ProcessorURLContext on


GroupConfig /home/system/dspam/group