source: npl/mailserver/zpush/config.php @ 105afb5

<?php
/***********************************************
* File      :   config.php
* Project   :   Z-Push
* Descr     :   Main configuration file
*
* Created   :   01.10.2007
*
* Copyright 2007 - 2013 Zarafa Deutschland GmbH
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Affero General Public License, version 3,
* as published by the Free Software Foundation with the following additional
* term according to sec. 7:
*
* According to sec. 7 of the GNU Affero General Public License, version 3,
* the terms of the AGPL are supplemented with the following terms:
*
* "Zarafa" is a registered trademark of Zarafa B.V.
* "Z-Push" is a registered trademark of Zarafa Deutschland GmbH
* The licensing of the Program under the AGPL does not imply a trademark license.
* Therefore any rights, title and interest in our trademarks remain entirely with us.
*
* However, if you propagate an unmodified version of the Program you are
* allowed to use the term "Z-Push" to indicate that you distribute the Program.
* Furthermore you may use our trademarks where it is necessary to indicate
* the intended purpose of a product or service provided you use it in accordance
* with honest practices in industrial or commercial matters.
* If you want to propagate modified versions of the Program under the name "Z-Push",
* you may only do so if you have a written permission by Zarafa Deutschland GmbH
* (to acquire a permission please contact Zarafa at trademark@zarafa.com).
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Affero General Public License for more details.
*
* You should have received a copy of the GNU Affero General Public License
* along with this program.  If not, see <http://www.gnu.org/licenses/>.
*
* Consult LICENSE file for details
************************************************/

/**********************************************************************************
 *  Default settings
 */
    // Defines the default time zone, change e.g. to "Europe/London" if necessary
    define('TIMEZONE', '');

    // Defines the base path on the server
    define('BASE_PATH', '/var/www/htdocs/syn3/z-push/');

    // Try to set unlimited timeout
    define('SCRIPT_TIMEOUT', 0);

    // When accessing through a proxy, the "X-Forwarded-For" header contains the original remote IP
    define('USE_X_FORWARDED_FOR_HEADER', false);

    // When using client certificates, we can check if the login sent matches the owner of the certificate.
    // This setting specifies the owner parameter in the certificate to look at.
    define("CERTIFICATE_OWNER_PARAMETER", "SSL_CLIENT_S_DN_CN");

/**********************************************************************************
 *  Default FileStateMachine settings
 */
    define('STATE_DIR', '/var/lib/z-push/');


/**********************************************************************************
 *  Logging settings
 *  Possible LOGLEVEL and LOGUSERLEVEL values are:
 *  LOGLEVEL_OFF            - no logging
 *  LOGLEVEL_FATAL          - log only critical errors
 *  LOGLEVEL_ERROR          - logs events which might require corrective actions
 *  LOGLEVEL_WARN           - might lead to an error or require corrective actions in the future
 *  LOGLEVEL_INFO           - usually completed actions
 *  LOGLEVEL_DEBUG          - debugging information, typically only meaningful to developers
 *  LOGLEVEL_WBXML          - also prints the WBXML sent to/from the device
 *  LOGLEVEL_DEVICEID       - also prints the device id for every log entry
 *  LOGLEVEL_WBXMLSTACK     - also prints the contents of WBXML stack
 *
 *  The verbosity increases from top to bottom. More verbose levels include less verbose
 *  ones, e.g. setting to LOGLEVEL_DEBUG will also output LOGLEVEL_FATAL, LOGLEVEL_ERROR,
 *  LOGLEVEL_WARN and LOGLEVEL_INFO level entries.
 */
    define('LOGFILEDIR', '/var/log/z-push/');
    define('LOGFILE', LOGFILEDIR . 'z-push.log');
    define('LOGERRORFILE', LOGFILEDIR . 'z-push-error.log');
    define('LOGLEVEL', LOGLEVEL_INFO);
    define('LOGAUTHFAIL', false);


    // To save e.g. WBXML data only for selected users, add the usernames to the array
    // The data will be saved into a dedicated file per user in the LOGFILEDIR
    // Users have to be encapusulated in quotes, several users are comma separated, like:
    //   $specialLogUsers = array('info@domain.com', 'myusername');
    define('LOGUSERLEVEL', LOGLEVEL_DEVICEID);
    $specialLogUsers = array();

    // Location of the trusted CA, e.g. '/etc/ssl/certs/EmailCA.pem'
    // Uncomment and modify the following line if the validation of the certificates fails.
    // define('CAINFO', '/etc/ssl/certs/EmailCA.pem');

/**********************************************************************************
 *  Mobile settings
 */
    // Device Provisioning
    define('PROVISIONING', false);

    // This option allows the 'loose enforcement' of the provisioning policies for older
    // devices which don't support provisioning (like WM 5 and HTC Android Mail) - dw2412 contribution
    // false (default) - Enforce provisioning for all devices
    // true - allow older devices, but enforce policies on devices which support it
    define('LOOSE_PROVISIONING', false);

    // Default conflict preference
    // Some devices allow to set if the server or PIM (mobile)
    // should win in case of a synchronization conflict
    //   SYNC_CONFLICT_OVERWRITE_SERVER - Server is overwritten, PIM wins
    //   SYNC_CONFLICT_OVERWRITE_PIM    - PIM is overwritten, Server wins (default)
    define('SYNC_CONFLICT_DEFAULT', SYNC_CONFLICT_OVERWRITE_PIM);

    // Global limitation of items to be synchronized
    // The mobile can define a sync back period for calendar and email items
    // For large stores with many items the time period could be limited to a max value
    // If the mobile transmits a wider time period, the defined max value is used
    // Applicable values:
    //   SYNC_FILTERTYPE_ALL (default, no limitation)
    //   SYNC_FILTERTYPE_1DAY, SYNC_FILTERTYPE_3DAYS, SYNC_FILTERTYPE_1WEEK, SYNC_FILTERTYPE_2WEEKS,
    //   SYNC_FILTERTYPE_1MONTH, SYNC_FILTERTYPE_3MONTHS, SYNC_FILTERTYPE_6MONTHS
    define('SYNC_FILTERTIME_MAX', SYNC_FILTERTYPE_ALL);

    // Interval in seconds before checking if there are changes on the server when in Ping.
    // It means the highest time span before a change is pushed to a mobile. Set it to
    // a higher value if you have a high load on the server.
    define('PING_INTERVAL', 30);

    // Interval in seconds to force a re-check of potentially missed notifications when
    // using a changes sink. Default are 300 seconds (every 5 min).
    // This can also be disabled by setting it to false
    define('SINK_FORCERECHECK', 300);

    // Set the fileas (save as) order for contacts in the webaccess/webapp/outlook.
    // It will only affect new/modified contacts on the mobile which then are synced to the server.
    // Possible values are:
    // SYNC_FILEAS_FIRSTLAST    - fileas will be "Firstname Middlename Lastname"
    // SYNC_FILEAS_LASTFIRST    - fileas will be "Lastname, Firstname Middlename"
    // SYNC_FILEAS_COMPANYONLY  - fileas will be "Company"
    // SYNC_FILEAS_COMPANYLAST  - fileas will be "Company (Lastname, Firstname Middlename)"
    // SYNC_FILEAS_COMPANYFIRST - fileas will be "Company (Firstname Middlename Lastname)"
    // SYNC_FILEAS_LASTCOMPANY  - fileas will be "Lastname, Firstname Middlename (Company)"
    // SYNC_FILEAS_FIRSTCOMPANY - fileas will be "Firstname Middlename Lastname (Company)"
    // The company-fileas will only be set if a contact has a company set. If one of
    // company-fileas is selected and a contact doesn't have a company set, it will default
    // to SYNC_FILEAS_FIRSTLAST or SYNC_FILEAS_LASTFIRST (depending on if last or first
    // option is selected for company).
    // If SYNC_FILEAS_COMPANYONLY is selected and company of the contact is not set
    // SYNC_FILEAS_LASTFIRST will be used
    define('FILEAS_ORDER', SYNC_FILEAS_LASTFIRST);

    // Amount of items to be synchronized per request
    // Normally this value is requested by the mobile. Common values are 5, 25, 50 or 100.
    // Exporting too much items can cause mobile timeout on busy systems.
    // Z-Push will use the lowest value, either set here or by the mobile.
    // default: 100 - value used if mobile does not limit amount of items
    define('SYNC_MAX_ITEMS', 100);

    // The devices usually send a list of supported properties for calendar and contact
    // items. If a device does not includes such a supported property in Sync request,
    // it means the property's value will be deleted on the server.
    // However some devices do not send a list of supported properties. It is then impossible
    // to tell if a property was deleted or it was not set at all if it does not appear in Sync.
    // This parameter defines Z-Push behaviour during Sync if a device does not issue a list with
    // supported properties.
    // See also https://jira.zarafa.com/browse/ZP-302.
    // Possible values:
    // false - do not unset properties which are not sent during Sync (default)
    // true  - unset properties which are not sent during Sync
    define('UNSET_UNDEFINED_PROPERTIES', false);

    // ActiveSync specifies that a contact photo may not exceed 48 KB. This value is checked
    // in the semantic sanity checks and contacts with larger photos are not synchronized.
    // This limitation is not being followed by the ActiveSync clients which set much bigger
    // contact photos. You can override the default value of the max photo size.
    // default: 49152 - 48 KB default max photo size in bytes
    define('SYNC_CONTACTS_MAXPICTURESIZE', 49152);

    // Over the WebserviceUsers command it is possible to retrieve a list of all
    // known devices and users on this Z-Push system. The authenticated user needs to have
    // admin rights and a public folder must exist.
    // In multicompany environments this enable an admin user of any company to retrieve
    // this full list, so this feature is disabled by default. Enable with care.
    define('ALLOW_WEBSERVICE_USERS_ACCESS', false);

/**********************************************************************************
 *  Backend settings
 */
    // the backend data provider
    define('BACKEND_PROVIDER', 'BackendZarafa');

/**********************************************************************************
 *  Search provider settings
 *
 *  Alternative backend to perform SEARCH requests (GAL search)
 *  By default the main Backend defines the preferred search functionality.
 *  If set, the Search Provider will always be preferred.
 *  Use 'BackendSearchLDAP' to search in a LDAP directory (see backend/searchldap/config.php)
 */
    define('SEARCH_PROVIDER', '');
    // Time in seconds for the server search. Setting it too high might result in timeout.
    // Setting it too low might not return all results. Default is 10.
    define('SEARCH_WAIT', 10);
    // The maximum number of results to send to the client. Setting it too high
    // might result in timeout. Default is 10.
    define('SEARCH_MAXRESULTS', 10);


/**********************************************************************************
 *  Synchronize additional folders to all mobiles
 *
 *  With this feature, special folders can be synchronized to all mobiles.
 *  This is useful for e.g. global company contacts.
 *
 *  This feature is supported only by certain devices, like iPhones.
 *  Check the compatibility list for supported devices:
 *      http://z-push.sf.net/compatibility
 *
 *  To synchronize a folder, add a section setting all parameters as below:
 *      store:      the ressource where the folder is located.
 *                  Zarafa users use 'SYSTEM' for the 'Public Folder'
 *      folderid:   folder id of the folder to be synchronized
 *      name:       name to be displayed on the mobile device
 *      type:       supported types are:
 *                      SYNC_FOLDER_TYPE_USER_CONTACT
 *                      SYNC_FOLDER_TYPE_USER_APPOINTMENT
 *                      SYNC_FOLDER_TYPE_USER_TASK
 *                      SYNC_FOLDER_TYPE_USER_MAIL
 *
 *  Additional notes:
 *  - on Zarafa systems use backend/zarafa/listfolders.php script to get a list
 *    of available folders
 *
 *  - all Z-Push users must have full writing permissions (secretary rights) so
 *    the configured folders can be synchronized to the mobile
 *
 *  - this feature is only partly suitable for multi-tenancy environments,
 *    as ALL users from ALL tenents need access to the configured store & folder.
 *    When configuring a public folder, this will cause problems, as each user has
 *    a different public folder in his tenant, so the folder are not available.

 *  - changing this configuration could cause HIGH LOAD on the system, as all
 *    connected devices will be updated and load the data contained in the
 *    added/modified folders.
 */

    $additionalFolders = array(
        // demo entry for the synchronization of contacts from the public folder.
        // uncomment (remove '/*' '*/') and fill in the folderid
/*
        array(
            'store'     => "SYSTEM",
            'folderid'  => "",
            'name'      => "Public Contacts",
            'type'      => SYNC_FOLDER_TYPE_USER_CONTACT,
        ),
*/
    );

?>